Dawopu - We never forget who we're working for Home | Contact Us
中文 English

Home > Casting & Forging Parts > Permanent Mold Castings

Permanent Mold Castings Parts

Permanent Mold Castings

Dawopu Group is gravity poured into cast iron molds, or graphite molds coated with a ceramic mold wash. Cores can be metal, sand, sand shell, or other. Molds open and castings are ejected. The Low Pressure Permanent Mold method pressure-pours up to 15 p.s.i

Metals:
Aluminum, Zinc, some Brass, Bronze, H.C. Copper, Lead and Gray Iron.

Size Range:
Limitation mainly foundry capabilities. Aluminum and Copper base: ounces to 100 lbs. Ferrous: 60 lbs. max.

Tolerances:
Aluminum: Basic ± .015"
Add ± .002"/in.
If across parting line add
± .010" to ± .030" depending on size      
Copper Base: Similar to Investment
Iron: ± .03" Basic.

Surface Finish:
Aluminum: 150-250RMS
Copper Base: 125-200RMS
Ferrous: 200-350RMS

Minimum Draft Requirements:
Non-Ferrous:
Outside: 2° Min (3° desirable)
Inside: 2° Min (4° desirable)
Ferrous: Outside: 1° Inside: 5°

Normal Minimum Section Thickness:
Aluminum: .100" for small areas, up to 3/16" or more for large areas.
Copper Base: .060"
Ferrous: 3/16" for small areas, 1/4" normal.

Ordering Quantities:
Minimum one day's run: (100-1,000 depending on size).

Normal Lead Time:
Samples: 8-20 weeks.

Production:
4-8 weeks A.S.A.

 

To inquire about Permanent Mold Castings, click here.

Contact Us

Dawopu Group
No168 JianDing Road Hangzhou City
Zhejiang Province 310021 China
Tel:86-571-89967020
Fax:86-571-89967015

CONTACT
Aerospace Parts Inquiries: info@dawopu.com
Business Development Fax to: (86) 571-89967015

Printer-friendly Version Printer-friendly Version

©
Dawopu Group