welcomeDawopu Group
Language selection: 中文版 ∷  英文版

Capabilities

CNC Honing

CNC Honing


Dawopu Group is the specialist provider of honing and super finishing services.

Honing is the process used to finish round bores using abrasive stones to achieve close tolerances, excellent surface finishes & improved geometry. Specialist tubing is often only available in a standard range of sizes & so it is necessary to use honing to produce non-standard sizes & finishes.

CNC Honing.Available Parameters
Minimum Bore Diameter.1.5mm 0.059"Maximum Bore Diameter.350mm 13.779"Maximum O.A.L.3000mm 118.11"Bore Tolerance under 76.2mm/3".+/-0.002mm +/-0.00008"Bore Tolerance over 76.2mm/3".+/-0.05mm +/-0.002"Surface Finish (Drilling Only)0.5μ 2 CLAAccuracy (Drill Wander / T.I.R.)0.025mm per 25.4mm 0.001"per 1"drilledMaterials Machined.All MaterialsShapes Machined.Any

It can be more cost effective to bore, hone & turn a billet to produce bespoke precision tubing than it is to purchase a standard tube & hone to size.

Examples of Work

Drive Shafts, Rifle Barrels, Valve Blocks,
Con Rods, Nozzles, Accumulators, Engine Blocks, Impellers, Anti-Roll Bars, Compressor Cylinders, Hydraulic Tubing.


CONTACT US

Contact:Mr Liu

Mobile:15869109368

Tel:86-571-89967020

E-mail:info@dawopu.com

Address:No151 ,ZiDingXiang Rd, Hangzhou. Zhejiang Province, China