welcomeDawopu Group
Language selection:
∷
∷
∷
| NOV 12P160 Triplex Mud Pump Parts Manual List | |||
| FLUID END ASSEMBLY (STANDARD) WITH “FAST CHANGE” VALVE COVERS (SECTION THRU CYLINDERS) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1292243 | MODULE STUDDED, SUCTION (INCLS. ITEMS 1 THRU 3) | ||
| 1292604 | MODULE STUDDED, PREMIUM SUCTION (INCLS. ITEMS 1 THRU 3) | ||
| 1 | 3 | 1292244 | MODULE, SUCTION |
| 3 | 1292603 | MODULE, PREMIUM SUCTION | |
| 2 | 36 | 2408049 | STUD, 1-1/2″ X 9-7/8″ LG. TOP TAPER LOCK |
| 3 | 36 | 6300240 | NUT. 1-1/2″ HEAVY HEX |
| 1292240 | MODULE STUDDED, DISCHARGE (INCLUDES ITEMS 4 THRU 12) | ||
| 1292601 | MODULE STUDDED, PREMIUM DISCHARGE (INCLUDES ITEMS 4 THRU 12) | ||
| 4 | 3 | 1292241 | MODULE, DISCHARGE |
| 3 | 1292600 | MODULE, PREMIUM DISCHARGE | |
| 5 | 36 | 2408049 | STUD, 1-1/2″ X 9-7/8″ LG. TOP TAPER LOCK |
| 6 | 18 | 2408028 | STUD, 1-1/8″ X 6-3/8″ LG. TOP TAPER LOCK |
| 7 | 30 | 2408029 | STUD, 1-3/8″ X 6-3/4″ LG. TOP TAPER LOCK |
| 8 | 18 | 2408033 | STUD, 1-3/4″ X 21-1/8″ LG. BOTTOM TAPER LOCK |
| 9 | 18 | 6300180 | NUT, 1-1/8″ HEAVY HEX |
| 10 | 30 | 6300220 | NUT, 1-3/8″ HEAVY HEX |
| 11 | 36 | 6300240 | NUT, 1-1/2″ HEAVY HEX |
| 12 | 18 | 6300281 | NUT, 1-3/4″ 8UNC HEAVY HEX |
| 6 | 1292354 | KIT, FAST CHANGE SCREW TYPE VALVE COVER | |
| 13 | 6 | 1292351 | RING, THREADED |
| 14 | 6 | 1292352 | COVER, VALVE |
| 15 | 6 | 1292353 | PULLER, SEAL RETAINER |
| 20 | 6 | 1292350 | RETAINER, SEAL |
| 21 | 6 | 1540127 | SEAL, VALVE RETAINER |
| 22 | 6 | 1560702 | SPRING, VALVE |
| 23 | 6 | 1292140 | HOLDER, VALVE GUIDE INSERT |
| 24 | 6 | 1292141 | INSERT, VALVE GUIDE |
| 1560985 | “G2” VALVE COMPLETE WITH POLYURETHANE DISC (INCLS. ITEMS 25 THRU 27) | ||
| 1560984 | “G2” VALVE COMPLETE WITH HYCAR DISC (INCLS. ITEMS 25 THRU 27) | ||
| 25 | 6 | 1560557 | DISC (POLYURETHANE), VALVE |
| 6 | 1560558 | DISC (HYCAR), VALVE | |
| 26 | 6 | 1560706 | LOCK, VALVE |
| 27 | 6 | 1560705 | RING, SNAP |
| 28 | 6 | 1561440 | SEAT, VALVE |
| 29 | 3 | 1540851 | SEAL, SUCTION MANIFOLD |
| 30 | 1 | 1292173 | MANIFOLD, FRONT SUCTION |
| 1 | 1292312 | MANIFOLD, SIDE INLET SUCTION | |
| 31 | 6 | 6511416 | PIN, 7/8″ X 2″ LG. DOWEL |
| 32 | 6 | 1292257 | SEAL |
| 33 | 3 | 1292266 | PLATE, WEAR |
| 36 | 24 | 7000485-11 | CAPSCREW, 7/8″ X 3″ LG. GRADE 5 CAD. PLTD. HEX HEAD |
| 58 | 1 | 7500065 | VALVE (SET AT 70 P.S.I.), SUCTION RELIEF |
| FLUID END ASSEMBLY (OPTIONAL) WITH “TAPR-LOK” VALVE COVERS (SECTION THRU CYLINDERS) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1292243 | MODULE STUDDED, SUCTION (INCLS. ITEMS 1 THRU 3) | ||
| 1292604 | MODULE STUDDED, PREMIUM SUCTION (INCLS. ITEMS 1 THRU 3) | ||
| 1 | 3 | 1292244 | MODULE, SUCTION |
| 3 | 1292603 | MODULE, PREMIUM SUCTION | |
| 2 | 36 | 2408027 | STUD, 1-1/2″ X 7-7/8″ TOP TAPER LOCK |
| 3 | 36 | 6300240 | NUT. 1-1/2″ HEAVY HEX |
| 1292240 | MODULE STUDDED, DISCHARGE (INCLUDES ITEMS 4 THRU 12) | ||
| 1292601 | MODULE STUDDED, PREMIUM DISCHARGE (INCLUDES ITEMS 4 THRU 12) | ||
| 4 | 3 | 1292241 | MODULE, DISCHARGE |
| 3 | 1292600 | MODULE, PREMIUM DISCHARGE | |
| 5 | 36 | 2408027 | STUD, 1-1/2″ X 7-7/8″ TOP TAPER LOCK |
| 6 | 18 | 2408028 | STUD, 1-1/8″ X 6-3/8″ TOP TAPER LOCK |
| 7 | 30 | 2408029 | STUD, 1-3/8″ X 6-3/4″ TOP TAPER LOCK |
| 8 | 18 | 2408033 | STUD, 1-3/4″ X 21-1/8″ BOTTOM TAPER LOCK |
| 9 | 18 | 6300180 | NUT, 1-1/8″ HEAVY HEX |
| 10 | 30 | 6300220 | NUT, 1-3/8″ HEAVY HEX |
| 11 | 36 | 6300240 | NUT, 1-1/2″ HEAVY HEX |
| 12 | 18 | 6300281 | NUT, 1-3/4″ 8UNC HEAVY HEX |
| 13 | 6 | 1292176 | RING, THREADED |
| 14 | 6 | 1292172 | COVER, VALVE |
| 15 | 6 | 1292171 | WASHER |
| 16 | 6 | 1292178 | SCREW |
| 17 | 6 | 6300182 | NUT, 1-1/8 12 HEAVY HEX |
| G-1292268 | WEDGE, LOCKING (INCLUDES ITEMS 18 AND 19) | ||
| 18 | 6 | 1292179 | WEDGE |
| 19 | 6 | 1292174 | SPRING, WEDGE RETAINING |
| 20 | 6 | 1292174 | RETAINER, VALVE |
| 21 | 6 | 1540127 | SEAL, VALVE RETAINER |
| 22 | 6 | 1560702 | SPRING, VALVE |
| 23 | 6 | 1292140 | HOLDER, VALVE GUIDE INSERT |
| 24 | 6 | 1292141 | INSERT, VALVE GUIDE |
| 1560985 | “G2” VALVE COMPLETE WITH POLYURETHANE DISC (INCLS. ITEMS 25 THRU 27) | ||
| 1560984 | “G2” VALVE COMPLETE WITH HYCAR DISC (INCLS. ITEMS 25 THRU 27) | ||
| 25 | 6 | 1560557 | DISC (POLYURETHANE), VALVE |
| 6 | 1560558 | DISC (HYCAR), VALVE | |
| 26 | 6 | 1560706 | LOCK, VALVE |
| 27 | 6 | 1560705 | RING, SNAP |
| 28 | 6 | 1561440 | SEAT, VALVE |
| 29 | 3 | 1540851 | SEAL, SUCTION MANIFOLD |
| 30 | 1 | 1292173 | MANIFOLD, FRONT SUCTION |
| 1 | 1292312 | MANIFOLD, SIDE INLET SUCTION | |
| 31 | 6 | 6511416 | PIN, 7/8″ X 2″ DOWEL |
| 32 | 6 | 1292257 | SEAL |
| 33 | 3 | 1292266 | PLATE, WEAR |
| 36 | 24 | 7000485-11 | CAPSCREW, 7/8″ X 3″ HEX HEAD CAD PLT GR5 |
| 58 | 1 | 7500065 | VALVE (SET AT 70 P.S.I.), SUCTION RELIEF |
| FLUID END ASSEMBLY (TOP VIEW OF ROD CHAMBERS & CYLINDERS) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 37 | 2 | 6829016 | ELBOW, 2″ X 90° 150# M.I.STREET |
| 50 | 6 | 6309140 | NUT, 7/8 HEX LOCK |
| 51 | 6 | 7000491-10 | CAPSCREW, 7/8 X 4-1/2 HEX GR5 |
| 64 | 2 | 1292258 | SEAL |
| 1292130 | COVER COMPLETE, ROD CHAMBER (INCLUDES ITEMS 65 THRU 67) | ||
| 65 | 3 | 1292339 | COVER, ROD CHAMBER |
| 66 | 3 | 1290406 | HINGE |
| 67 | 15 | 7041102 | SCREW, 1/4-20 X 3/8 FLAT HEAD MACHINE |
| 68 | 1 | 5912391 | FLANGE, WELD NECK RING JOINT DBL. X 5″ A.P.I. 5000# |
| 1 | 5912392 | FLANGE, BLIND RING JOINT 5″ A.P.I. 5000# | |
| 69 | 8 | 7178025 | SCREW, NO. 2 X 1/4 ROUND HEAD TYPE “U” DRIVE |
| 70 | 2 | 6908040 | RING, R44-S OVAL JOINT |
| 71 | 16 | 7006685 | CAPSCREW, 1-1/2 X 3″ SOCKET HEAD |
| 1292262 | SPACER STUDDED, DISCHARGE (INCLUDES ITEMS 72 THRU 74) | ||
| 72 | 2 | 1292246 | SPACER |
| 73 | 16 | 2408015 | STUD, 1-1/2 X 7-1/2 BOTTOM TAPER LOCK |
| 74 | 16 | 6300240 | NUT, 1-1/2 HEAVY HEX |
| 75 | 2 | 1292252 | CONNECTOR |
| 76 | 2 | 1292253 | ADAPTER |
| 77 | 4 | 1292175 | RING, BACK-UP |
| 78 | 16 | 7000307-11 | CAPSCREW, 1/2 X 2″ HEX HEAD CAD PLT GR5 |
| 79 | 16 | 7619050 | WASHER, 1/2 SPRING LOCK |
| 80 | 1 | G-2407274 | PLATE, WARNING |
| 81 | 4 | 2410031-437 | PACKING |
| 82 | 2 | 2410031-433 | PACKING |
| 83 | 1 | 2407142 | PLATE, VALVE COVER INSTRUCTION |
| FLUID END ASSEMBLY (SECTION THRU ROD CHAMBER) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 33 | 3 | 1292266 | PLATE, WEAR |
| 34 | 3 | 1292165 | BUSHING, LINER |
| 35 | 6 | 1292194 | BAFFLE, FLUID |
| 37 | 2 | 6829016 | ELBOW, 2″ X 90° 150# M.I.STREET |
| 38 | 3 | 012180170 | PISTON COMPLETE, 4″ (SERIES “A”) |
| 3 | 012180196 | PISTON COMPLETE, 4-1/2″ (SERIES “B”) | |
| 3 | 012180253 | PISTON COMPLETE, 5″ (SERIES “B”) | |
| 3 | 012180337 | PISTON COMPLETE, 5-1/2″ (SERIES “B”) | |
| 3 | 012180394 | PISTON COMPLETE, 6″ (SERIES “C”) | |
| 3 | 012180493 | PISTON COMPLETE, 6-1/4″ (SERIES “C”) | |
| 3 | 012180535 | PISTON COMPLETE, 6-1/2″ (SERIES “C”) | |
| 3 | 012180600 | PISTON COMPLETE, 6-3/4″ (SERIES “C”) | |
| 3 | 012180618 | PISTON COMPLETE, 7″ (SERIES “C”) | |
| 3 | 012180642 | PISTON COMPLETE, 7-1/4″ (SERIES “C”) | |
| 39 | 3 | 015180102 | CUP ASSEMBLY, 4″ |
| 3 | 015180144 | CUP ASSEMBLY, 4-1/2″ | |
| 3 | 015180185 | CUP ASSEMBLY, 5″ | |
| 3 | 015180227 | CUP ASSEMBLY, 5-1/2″ | |
| 3 | 015180268 | CUP ASSEMBLY, 6″ | |
| 3 | 015180284 | CUP ASSEMBLY, 6-1/4″ | |
| 3 | 015180300 | CUP ASSEMBLY, 6-1/2″ | |
| 3 | 015180326 | CUP ASSEMBLY, 6-3/4″ | |
| 3 | 015180342 | CUP ASSEMBLY, 7″ | |
| 3 | 015180359 | CUP ASSEMBLY, 7-1/4″ | |
| 40 | 3 | 05-466-400 | LINER, 4″ |
| 3 | 05-466-450 | LINER, 4-1/2″ | |
| 3 | 05-466-500 | LINER, 5″ | |
| 3 | 05-466-550 | LINER, 5-1/2″ | |
| 3 | 05-466-600 | LINER, 6″ | |
| 3 | 05-466-625 | LINER, 6-1/4″ | |
| 3 | 05-466-650 | LINER, 6-1/2″ | |
| 3 | 05-466-675 | LINER, 6-3/4″ | |
| 3 | 05-466-700 | LINER, 7″ | |
| 3 | 05-466-725 | LINER, 7-1/4″ | |
| 41 | 3 | 1540120 | GASKET, 4″ LINER PACKING |
| 3 | 1540120 | GASKET, 4-1/2″ LINER PACKING | |
| 3 | 07-923-265 | GASKET, 5″ LINER PACKING | |
| 3 | 07-923-263 | GASKET, 5-1/2″ LINER PACKING | |
| 3 | 07-923-261 | GASKET, 6″ LINER PACKING | |
| 3 | 07-923-283 | GASKET, 6-1/4″ LINER PACKING | |
| 3 | 07-923-284 | GASKET, 6-1/2″ LINER PACKING | |
| 3 | 07-923-287 | GASKET, 6-3/4″ LINER PACKING | |
| 3 | 07-923-285 | GASKET, 7″ LINER PACKING | |
| 3 | 1540154 | GASKET, 7-1/4″ LINER PACKING | |
| 42 | 3 | 1292120 | SPRAY SYSTEM, LINER |
| 43 | 3 | 1292147 | ROD, PISTON |
| 44 | 3 | 005-402-052 | NUT, 1-1/2″ 8 ELASTIC STOP |
| 45 | 3 | 1292146 | ROD, PISTON SUB |
| 1292166 | CLAMP COMPLETE, LINER (INCLUDES ITEMS ITEMS 46 THRU 51) | ||
| 46 | 3 | 1292167 | CLAMP, LINER |
| 47 | 6 | G-1292168-P | CONNECTOR |
| 48 | 6 | 1292169 | PIN |
| 49 | 12 | 6571620 | PIN, 1/4″ X 1-1/4″ SPRING |
| 50 | 6 | 6309140 | NUT, 7/8 HEX LOCK |
| 51 | 6 | 7000491-10 | CAPSCREW, 7/8″ X 4-1/2″ HEX HEAD GR5 |
| 52 | 6 | 1292085 | CLAMP COMPLETE, ROD (INCLUDES ITEMS 53 THRU 54) |
| 53 | 12 | 7619058 | WASHER, 5/8″ LOCK |
| 54 | 12 | 6309100 | NUT, 5/8″ HEX LOCK |
| 55 | 12 | 7000400-11 | CAPSCREW, 5/8″ X 2-3/4 CAD PLT GR5 HEX HEAD |
| 59 | 6 | 6300041 | NUT, 1/4″ HEX CAD PLT |
| 60 | 6 | 7000124-11 | CAPSCREW, 1/4″ X 5″ HEX HEAD CAD PLT GR5 |
| 61 | 24 | 7621016 | WASHER, 1/4″ TYPE “A” CAD PLT |
| 62 | 15 | 6310040 | NUT, 1/4″ FLEXLOC |
| 63 | 15 | 7000113-11 | CAPSCREW, 1/4″ X 2-1/4″ HEX HEAD GR5 CAD PLT |
| LINER SPRAY SYSTEM | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1292120 | SPRAY SYSTEM, LINER (CONSISTS OF THE FOLLOWING) | ||
| 1 | 3 | 1292184 | MANIFOLD, SPRAY (INCLUDES ITEMS 2 THRU 7) |
| 2 | 9 | G-7818256 | SCREW, 3/8″ – 16 X 1-3/4″ STAINLESS STEEL THUMB |
| 3 | 18 | 1291193 | NOZZLE, SPRAY |
| 4 | 18 | 7006204-30 | CAPSCREW, 3/8″ X 1/2″ STAINLESS STEEL SOCKET HEAD |
| 5 | 3 | 7804075 | ELBOW, 1/2″ X 90° 150# STAINLESS STEEL STREET |
| 6 | 6 | 7815099 | PLUG, 1/2 150# STAINLESS STEEL HEX HEAD PIPE |
| 7 | 9 | 7813050 | NUT, 3/8″ – 16 STAINLESS STEEL WING |
| 8 | 3 | G2400075 | HOSE, 1/2″ X 16-1/2″ |
| 9 | 3 | 6800083 | BUSHING, 1″ X 1/2″ M.I. HEX PIPE |
| 10 | 3 | 6829004 | ELBOW, 1/2″ X 90° 150# M.I. STREET |
| 11 | 3 | 7815094 | PLUG, 1/2 M.P.T. QUICK CONNECT |
| 12 | 3 | 7818282 | SOCKET, 1/2″ F.P.T. QUICK CONNECT |
| POWER END ASSEMBLY (SECTION THRU POWER END) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1 | 2 | 1275157 | COVER, INSPECTION |
| 2 | 2 | 1275158 | GASKET, INSPECTION COVER |
| 3 | 2 | 1283190 | PLATE, CLEAN-OUT |
| 4 | 2 | 1283191 | GASKET, CLEAN-OUT PLATE |
| 5 | 1 | 1284106 | GASKET, OIL GAUGE |
| 6 | 3 | 1290251 | SCREW, OIL PASSAGE |
| 7 | 9 | 1291074 | BOLT, HOOK |
| 8 | 3 | 1292009 | RETAINER, OIL WIPER |
| 9 | 3 | 1292016 | SHIELD, INTERMEDIATE ROD OIL |
| 10 | 3 | 1292023 | PLATE, RETAINER |
| 11 | 6 | 1292269 | SPACER, OIL WIPER |
| 12 | 3 | 1292064 | GASKET, WRENCH HOLE |
| 13 | 1 | 1292069 | BRACE, OIL TROUGH |
| 14 | 1 | 1292070 | TROUGH (LEFT HAND), PINION OIL |
| 15 | 1 | 1292071 | TROUGH (RIGHT HAND), PINION OIL |
| 16 | 1 | 1292072 | WIPER (LEFT HAND), PINION OIL |
| 17 | 1 | 1292073 | WIPER (RIGHT HAND), PINION OIL |
| 18 | 3 | 1292075 | COVER, TOP ACCESS |
| 19 | 3 | 1292076 | GASKET, TOP ACCESS COVER |
| 20 | 2 | 1292077 | COVER, WRENCH HOLE |
| 21 | 3 | 1292079 | GASKET, OIL WIPER |
| 22 | 2 | 1292080 | RAIL, SUMP SUPPORT |
| 23 | 1 | 1292082 | WIPER (LEFT HAND), GEAR AND PINION |
| 24 | 3 | 1292083 | ROD, INTERMEDIATE |
| 25 | 1 | 1292089 | TROUGH (LEFT HAND), CROSSHEAD LUBE OIL |
| 26 | 1 | 1292092 | WIPER (RIGHT HAND), GEAR AND PINION |
| 27 | 1 | 1292095 | GASKET, MAIN FRAME COVER |
| 28 | 1 | 1292110 | COVER (CHENTER), WRENCH HOLE |
| 29 | 1 | 1292114 | PLATE, OIL GAUGE |
| 30 | 12 | 1292182 | WIPER, INTERMEDIATE ROD OIL |
| 31 | 3 | 1292227 | GASKET, OIL WIPER RETAINER |
| 32 | 1 | 1292282 | SUMP, LUBE OIL (INCLUDES ITEMS 114 AND 118) |
| 33 | 1 | 1292295 | STRAINER, LUBE SUMP |
| 34 | 1 | 2400029 | DISTICK, OIL LEVERL |
| 35 | 8 | 2499940 | SCREW, 3/8″ – 3/4″ DRILLED HEAD |
| 36 | 1 | 2407100 | PLATE, NAME AND INSTRUCTION |
| 37 | 8 | 6300081 | NUT, 1/2″ CAD PLATED HEX |
| 38 | 34 | 7000397-11 | CAPSCREW, 5/8″ X 2″ CAD PLT HEX HEAD GR5 |
| 39 | 6 | 6310040 | NUT, 1/4″ – 20 UNC FLEXLOC |
| 40 | 8 | 6310060 | NUT, 3/8″ – 16 UNC FLEXLOC |
| 41 | 3 | 6320062 | NUT, 3/8″ – UNC HEX JAM |
| 42 | 9 | 6541612 | PIN, 1/4″ X 1-1/2 |
| 43 | 1 | 6800163 | BUSHING, 2″ X 1″ C.I. 150# BLK HEX PIPE |
| 44 | 2 | 6829016 | ELBOW, 2″ X 90° 150# M.I.STREET |
| 45 | 6 | 7000114-11 | CAPSCREW, 1/4″ X 2-1/2″ CAD PLT HEX HEAD GR5 |
| 46 | 48 | 7000208-11 | CAPSCREW, 3/8″ X 1″ CAD PLT HEX HEAD GR5 |
| 47 | 4 | 7000213-11 | CAPSCREW, 3/8″ X 2-1/4″ CAD PLT HEX HEAD GR5 |
| 48 | 4 | 7000210-11 | CAPSCREW, 3/8″ X 1-1/2″ CAD PLT HEX HEAD GR5 |
| 49 | 44 | 7000303-11 | CAPSCREW, 1/2″ X 1″ CAD PLT HEX HEAD GR5 |
| 50 | 12 | 7000304-11 | CAPSCREW, 1/2″ X 1-1/4″ CAD PLT HEX HEAD GR5 |
| 51 | 12 | 7000309-11 | CAPSCREW, 1/2″ X 2-1/4″ CAD PLT HEX HEAD GR5 |
| 52 | 6 | 7000612-10F | CAPSCREW, 1-1/4″ – 12 X 4-1/2″ CAD PLT HEX HEAD GR5 |
| 53 | 2 | 7027393 | SCREW, 5/8″ X 1″ CUP POINT SOCKET HEAD |
| 54 | 8 | 7035305-01 | SCREW, 1/2 X 1-1/2″ CAD PLT FLAT HEAD MACHINE |
| 55 | 6 | 7178025 | SCREW, NO. 2 X 1/4″ TYPE “U” ROUND HEAD MACHINE |
| 56 | 16 | 7600024 | WASHER, 3/8″ TYPE “A” |
| 57 | 12 | 7618014 | WASHER, STAT-O-SEAL |
| 58 | 8 | 7619050 | WASHER, 1/2″ CAD PLT SPRING |
| 59 | 34 | 7619058 | WASHER, 5/8″ CAD PLT SPRING |
| 60 | 12 | 7621016 | WASHER, 1/4″ CAD PLT TYPE “A” |
| 61 | 20 | 7621032 | WASHER, 1/2″ CAD PLT TYPE “A” |
| 62 | 34 | 7621040 | WASHER, 5/8″ CAD PLT TYPE “A” |
| 63 | 1 | 7802020 | BREATHER |
| 64 | 3 | 7805052 | FITTING, 1/8″ HYDRAULIC GREASE |
| 65 | 3 | 7805062 | FITTING, 1/8″ X 45° ELBOW BODY GREASE |
| 66 | 3 | 7815057 | PLUG, 1″ MAGNETIC POST |
| 67 | 2 | 7817170 | GASKET, 3/16 X 2″ X 24″ SPONGE RUBBER |
| 114 | 2 | 6874012 | PLUG, 1-1/2″ C.I. SOLID SQUARE HEAD PIPE |
| 115 | 8 | G-1292139 | PLATE, WIPER RETAINING |
| 116 | 18 | G-7061091-17 | SCREW, NO. 10-24 X 5/8″ ZINC PLT HEX HEAD MACHINE |
| 117 | 18 | 7619025 | WASHER, NO. 10 CAD PLT SPRING LOCK |
| 118 | 2 | 6874016 | PLUG, 2″ C.I. SOLID SQUARE HEAD PIPE |
| 147 | 3 | 1282036 | HOSE, 1″ X 30″ |
| 148 | 6 | 6829008 | ELBOW, 1″ X 90° M.I. STREET |
| POWER END ASSEMBLY (SECTION THRU CRANKSHAFT) 1292001 | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 68 | 2 | ZT-15000 | BEARING, MAIN |
| 69 | 4 | 1283147 | SHIM (.005″ THICK), BEARING SUPPORT |
| 70 | 2 | 1283148 | SHIM (.007″ THICK), BEARING SUPPORT |
| 71 | 2 | 1292011 | CAGE, MAIN BEARING |
| 72 | 2 | 1292012 | CAP, MAIN BEARING END |
| 73 | 2 | 1292021 | RING, MAIN BARING LOCK |
| 74 | 2 | 1292022 | PLATE, MAIN BEARING RETAINER |
| 75 | 2 | 1292081 | RETAINER, MAIN BEARING CAGE OIL |
| 76 | 2 | 1292096 | GASKET, MAIN BEARING END CAP |
| 77 | 8 | 1292104 | SHIM, (.020″ THICK), MAIN BEARING LOCKING RING (YELLOW) |
| 78 | 10 | 1292105 | SHIM, (.00075″ THICK), MAIN BEARING LOCKING RING (CLEAR) |
| 79 | 14 | 1292106 | SHIM, (.005″ THICK), MAIN BEARING LOCKING RING (BLUE) |
| 80 | 2 | 1292152 | SHIM, (.0625″ THICK), MAIN BEARING RETAINER PLATE |
| 81 | 4 | 1292153 | SHIM, (.020″ THICK), MAIN BEARING RETAINER PLATE |
| 82 | 8 | 1292154 | SHIM, (.005″ THICK), MAIN BEARING RETAINER PLATE |
| 83 | 1 | 1292005 | CRANKSHAFT (INCLUDES 4 OF ITEM 132) |
| 84 | 24 | 2400690 | SCREW, 3/8″ X 1″ DRILLED HEAD |
| 85 | 48 | 2402180 | SCREW, 1″ X 3″ DRILLED HEAD |
| 86 | 8 | 2405024 | SCREW, 1-3/8″ X 3-1/2″ DRILLED HEAD |
| 87 | 16 | 5506202 | BOLT, 3/8″ X 3/4″ PLACE |
| 88 | 2 | 6310360 | NUT, 2-1/4″ – 8 UNC FLEXLOC |
| 89 | 2 | 7400842 | TUBING, 1/2″ O.D. X 19″ SMLS. STEEL |
| 90 | 24 | 7600024 | WASHER, 3/8″ TYPE “A” |
| 91 | 2 | 7804146 | ELBOW, 1/2″ T. X 3/8″ P.T. X 90° MALE COMPRESSION |
| 92 | 2 | G-7804202 | ELBOW, 1/2″ T. X 3/8″ P.T. X 45° MALE COMPRESSION |
| 94 | 2 | 1292024 | BOLT, MAIN BEARING SUPPORT |
| 119 | 12 | 1292006 | BOLT, CRANKSHAFT GEAR |
| 120 | 1 | 1292008 | GEAR (141 TEETH), CRANKSHAFT |
| 121 | 12 | 6310181 | NUT, 1-1/8″ 7 UNC FLEXLOC |
| 122 | 3 | ZB-28515 | BEARING, CONNECTING ROD |
| 123 | 3 | 1286230 | RETAINER (OUTER), CONNECTING ROD BEARING |
| 124 | 3 | 1286237 | RETAINER (INNER), CONNECTING ROD BEARING |
| 125 | 3 | 1287149 | SHIM (0.020″ THICK), OUTER CONNECTING ROD RETAINER (YELLOW) |
| 126 | 9 | 1287150 | SHIM (0.0075″ THICK), OUTER CONNECTING ROD RETAINER (CLEAR) |
| 127 | 9 | 1287151 | SHIM (0.005″ THICK), OUTER CONNECTING ROD RETAINER (BLUE) |
| 129 | 3 | 1292007 | ROD, CONNECTING |
| 132 | 4 | 10-306-037 | RETAINER, CONNECTING ROD (INCLUDES TWO ITEM 136) |
| 136 | 8 | 75-632-445 | SCREW, 1/2″ – 12 X 2-1/4″ SELF LOC |
| 137 | 24 | 2405013 | SCREW, 3/4″ X 6-1/2″ DRILLED HEAD |
| POWER END ASSEMBLY (SECTION THRU PINION & CROSSHEAD) 1292001 | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 95 | 2 | YS-10004 | SEAL, PINION BEARING OIL |
| 96 | 2 | 1292020 | RETAINER, PINION BEARING SEAL |
| 97 | 2 | 1292097 | GASKET, BEARING RETAINER |
| 98 | 2 | 1292113 | COVER, CROSSHEAD HAND HOLE |
| 99 | 1 | 1292010 | PINION (41 TEETH) |
| 100 | 32 | 2405016 | SCREW, 3/4″ X 2″ DRILLED HEAD |
| 101 | 2 | ZB-10236 | BEARING, PINION |
| 102 | 8 | 7000396-11 | CAPSCREW, 5/8″ X 1-3/4″ CAD PLT HEX HEAD GR5 |
| 103 | 32 | 7621044 | WASHER, 3/4″ TYPE “A” CAD PLT |
| 104 | 8 | 7618022 | WASHER, 5/8 STAT-O-SEAL |
| 105 | 3 | ZB-8253 | BEARING, CROSSHEAD PIN |
| 106 | 6 | 1287109 | RING, CROSSHEAD PIN BEARING SNAP |
| 107 | 6 | 1290114 | SHIM, CROSSHEAD PIN RETAINER |
| 108 | 3 | 1292028 | PIN, CROSSHEAD |
| 109 | 3 | 1292112 | RETAINER, CROSSHEAD PIN |
| 110 | 6 | 5506714 | BOLT, 3/4″ X 2-1/2″ PLACE |
| 111 | 3 | 6912019 | RING, RETAINING |
| 112 | 6 | 2402470 | CAPSCREW, 3/4″ X 3″ DRILLED HEX HEAD |
| 113 | 6 | 7619068 | WASHER, 3/4″ EXTRA DUTY SPRING |
| 128 | 3 | 1290089 | CONDUCTOR, OIL |
| 130 | 2 | 1292015 | CROSSHEAD, RIGHT HAND AND CENTER |
| 131 | 1 | 1292090 | CROSSHEAD, LEFT HAND |
| 139 | 3 | 6875003 | PLUG, 3/8″ COUNTERSUNK PIPE |
| 141 | 1 | 1292018 | CAGE (LEFT HAND), PINION BEARING |
| 142 | 1 | 1292019 | CAGE (RIGHT HAND), PINION BEARING |
| 143 | 2 | 1292027 | PLATE, PINION BEARING CAGE |
| 144 | 8 | 2402680 | CAPSCREW, 5/8″ X 2″ DRILLED HEX HEAD |
| 145 | 8 | 7600040 | WASHER, 5/8″ YTPE “A” |
| 146 | 1 | X12-2537 | CAP, PINION SHAFT |
| 149 | 6 | 1292017 | LINER, CROSSHEAD |
| 150 | 15 | 1292103 | SHIM, CROSSHEAD LINER |
| 151 | 18 | 2405022 | CAPSCREW, 7/8″ X 4″ DRILLED HEX HEAD |
| 152 | 18 | 2405023 | CAPSCREW, 7/8″ X 4-1/4″ DRILLED HEX HEAD |
| 153 | 1 | 6873008 | PLUG, 1″ C.I. CORED SQUARE HEAD PIPE |
| 154 | 36 | 7618026 | WASHER, 7/8″ STAT-O-SEAL |
| 155 | 1 | 2404073 | KEY, 1-1/8″ X 2 X 15-1/4″ LONG |
| POWER END ASSEMBLY (SUCTION STABILIZER ASSY’S) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1292369 | STABILIZER ASSEMBLY, SUCTION (CONSISTS OF THE FOLLOWING) | ||
| 1 | 1 | 5902487 | FLANGE, 10″ 150# R.J. WELD NECK |
| 2 | 1 | 98-016-232 | ELBOW, 10″ X 90 DEG. SCH. 40 LONG RADIUS |
| 3 | 1 | 98-052-100 | REDUCER, 12″ X 10″ SCH. 40 CONCENTRIC |
| 4 | 1 | 67096588 | PIPE, 12″ STD. WEIGHT |
| 5 | 1 | 98-012-034 | CAP, 12″ STD. WEIGHT |
| 6 | 1 | 78-105-206 | COUPLING, 3/4″ 3000# HALF |
| 7 | 2 | 78-105-204 | COUPLING, 1/2″ 3000# HALF |
| 8 | 2 | 86-424-001 | NIPPLE, 1/2″ X CLOSE SCH. 40 BW STEEL PIPE |
| 9 | 2 | 78-179-004 | ELBOW, 1/2″ X 90 DEG. 3000# STREET |
| 10 | 2 | 78-101-081 | VALVE, 1/2″ BALL |
| 11 | 1 | 86-425-013 | NIPPLE, 3/4″ X 4″ SCH. 40 BW STEEL PIPE |
| 12 | 1 | 78-101-082 | VALVE, 3/4″ BALL |
| 1292388 | STABILIZER ASSEMBLY, SUCTION (CONSISTS OF THE FOLLOWING) | ||
| 1 | 1 | 98-055-032 | TEE, 10″ SCH. 40 WELDING |
| 2 | 1 | 5902487 | FLANGE, 10″ ANSI CLASS 150# R.J. WELD NECK STD. WT. |
| 3 | 1 | 98-052-100 | REDUCER, 12″ X 10″ STD. WT. CONCENTRIC |
| 4 | 1 | 67096588 | PIPE, 12″ STD. WEIGHT |
| 5 | 1 | 98-012-034 | CAP, 12″ STD. WEIGHT |
| 6 | 1 | 78-105-206 | COUPLING, 3/4″ 3000# HALF |
| 7 | 2 | 78-105-204 | COUPLING, 1/2″ 3000# HALF |
| 8 | 2 | 86-424-001 | NIPPLE, 1/2″ X CLOSE SCH. 40 BW STEEL PIPE |
| 9 | 2 | 78-179-004 | ELBOW, 1/2″ X 90 DEG. 3000# STREET |
| 10 | 2 | 78-101-081 | VALVE, 1/2″ BALL |
| 11 | 1 | 86-425-013 | NIPPLE, 3/4″ X 4″ SCH. 40 BW STEEL PIPE |
| 12 | 1 | 78-101-082 | VALVE, 3/4″ BALL |
| DAMPENER MANIFOLD ASSEMBLY (DOUBLE SIDE INLET SUCTION) 1292312 | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1292312 | MANIFOLD WITH DAMPENER, DOUBLE SIDE INLET SUCTION | ||
| 1 | 1 | 1292313 | MAINFOLD, DAMPENER |
| 2 | 1 | 5902485 | FLANGE, 10″ A.S.A. 150# RING JOINT BLIND |
| 3 | 1 | 6908046 | RING, R52-S OVAL JOINT |
| 4 | 12 | 7000491-10 | CAPSCREW, 7/8″ X 4-1/2″ HEX HEAD GR5 |
| 5 | 12 | 6300149 | NUT, 7/8″ CAD PLT HEX |
| 6 | 1 | 1290195 | DIAPHRAGM |
| 7 | 1 | 1290196 | SPACER |
| 8 | 1 | 1290197 | COVER |
| 9 | 1 | 1290198 | RETAINER |
| 10 | 2 | 1290199 | GASKET |
| 11 | 2 | 1290228 | GUARD |
| 12 | 1 | 2407136 | PLATE, INSTRUCTION |
| 13 | 8 | 7178025 | SCREW, NO. 2″ X 1/4″ TYPE “U” ROUND HEAD DRIVE |
| 14 | 2 | 2410031-024 | PACKING |
| 15 | 32 | 7000361-11 | CAPSCREW, 9/16″ X 4″ CAD PLT HEX HEAD GR5 |
| 16 | 1 | 7500021 | VALVE, CHECK |
| 17 | 32 | 7600036 | WASHER, 9/16″ TYPE “A” |
| 18 | 1 | 7500396 | VALVE, 1/4″ RELIEF |
| 19 | 2 | 7815106 | PLUG, SIGHT |
| 20 | 1 | 6817124 | NIPPLE, 2″ X 5-1/2″ STD. BW PIPE |
| 21 | 2 | 6874016 | PLUG, 2″ C.I. SOLID SQUARE HEAD PIPE |
| 22 | 1 | 6888016 | TEE, 2″ 150# M.I. PIPE |
| PULSATION DAMPENER ASSEMBLY (OPTIONAL EQUIPMENT) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1 | 1 | 1290195 | DIAPHRAGM |
| 2 | 1 | 1290196 | SPACER |
| 3 | 1 | 1290197 | COVER |
| 4 | 1 | 1290198 | RETAINER |
| 5 | 2 | 1290199 | GASKET |
| 6 | 2 | 1290228 | GUARD |
| 7 | 1 | 2407136 | PLATE, INSTRUCTION |
| 8 | 2 | 2410031-024 | PACKING |
| 9 | 32 | 7000361-11 | CAPSCREW, 9/16″ X 4″ HEX HEAD CAD PLT GR5 |
| 10 | 8 | 7178025 | SCREW, NO. 2″ X 1/4″ TYPE “U” ROUND HEAD DRIVE |
| 11 | 1 | 7500021 | VALVE, CHECK |
| 12 | 32 | 7621036 | WASHER, 9/16″ TYPE “A” |
| 13 | 1 | 7500396 | VALVE, 1/4″ RELIEF |
| 14 | 2 | 7815106 | PLUG, SIGHT |
| 1292230 | DAMPENER, 8″ RIGHT HAND SIDE INLET FOR 10″ SUCTION LINE | ||
| 1 | 1292231 | BODY, DAMPENER | |
| 1 | 6010023 | GASKET, 8″ FLAT RING | |
| 8 | 6300121 | NUT, 3/4″ CAD PLT HEX | |
| 1 | 6874016 | PLUG, 2″ SOLID SQUARE HEAD PIPE | |
| 1 | 6908046 | RING, R52-S | |
| 8 | 7000445-11 | CAPSCREW, 3/4″ X 3-1/4″ CAD PLT HEX HEAD GR5 | |
| 12 | 7000486-10 | CAPSCREW, 7/8″ X 3-1/4″ CAD PLT HEX HEAD GR5 | |
| 1292206 | DAMPENER, 8″ LEFT HAND SIDE INLET FOR 10″ SUCTION LINE | ||
| 1 | 1292205 | BODY, DAMPENER | |
| 1 | 6010023 | GASKET, 8″ FLAT RING | |
| 8 | 6300121 | NUT, 3/4″ CAD PLT HEX | |
| 1 | 6874016 | PLUG, 2″ SOLID SQUARE HEAD PIPE | |
| 1 | 6908046 | RING, R52-S | |
| 8 | 7000445-11 | CAPSCREW, 3/4″ X 3-1/4″ CAD PLT HEX HEAD GR5 | |
| 12 | 7000486-10 | CAPSCREW, 7/8″ X 3-1/4″ CAD PLT HEX HEAD GR5 | |
| 1292298 | DAMPENER, 10″ RIGHT HAND SIDE INLET FOR 10″ SUCTION LINE | ||
| 1 | G-1292299 | BODY, DAMPENER | |
| 1 | 6010030 | GASKET, 10″ FLAT RING | |
| 12 | 6300149 | NUT, 7/8″ CAD PLT HEX | |
| 1 | 6874016 | PLUG, 2″ SOLID SQUARE HEAD PIPE | |
| 1 | 6908046 | RING, R52-S | |
| 12 | 7000486-10 | CAPSCREW, 7/8″ X 3-1/4″ CAD PLT HEX HEAD GR5 | |
| 12 | 7000487-10 | CAPSCREW, 7/8″ X 3-1/2″ HEX HEAD GR5 | |
| 1292296 | DAMPENER, 10″ LEFT HAND SIDE INLET FOR 10″ SUCTION LINE | ||
| 1 | G-1292297 | BODY, DAMPENER | |
| 1 | 6010030 | GASKET, 10″ FLAT RING | |
| 12 | 6300149 | NUT, 7/8″ CAD PLT HEX | |
| 1 | 6874016 | PLUG, 2″ SOLID SQUARE HEAD PIPE | |
| 1 | 6908046 | RING, R52-S | |
| 12 | 7000486-10 | CAPSCREW, 7/8″ X 3-3/4″ CAD PLT HEX HEAD GR5 | |
| 12 | 7000487-10 | CAPSCREW, 7/8″ X 3-1/2″ HEX HEAD GR5 | |
| 1292275 | DAMPENER, DOUBLE PLAIN END FOR 10″ SUCTION LINE | ||
| 1 | 1292277 | BODY, DAMPENER | |
| 1 | 6874016 | PLUG, 2″ SOLID SQUARE HEAD PIPE | |
| 1292212 | DAMPENER, SINGLE FLANGE FOR 10″ SUCTION LINE | ||
| 1 | 1292213 | BODY, DAMPENER | |
| 1 | 6874016 | PLUG, 2″ SOILD SQUARE HEAD PIPE | |
| 1 | 6908046 | RING, R52-S | |
| 12 | 7000486-10 | CAPSCREW, 7/8″ X 3-1/4″ CAD PLT HEX HEAD GR5 | |
| 1292203 | DAMPENER, DOUBLE FLANGED FOR 10″ SUCTION LINE | ||
| 1 | 1292200 | BODY, DAMPENER | |
| 12 | 6300149 | NUT, 7/8″ CAD PLATED HEX | |
| 1 | 6817121 | NIPPLE, 2″ X 3″ STD. PIPE | |
| 2 | 6874016 | PLUG, 2″ SOLID SQUARE HEAD PIPE | |
| 1 | 6888016 | TEE, 2″ STD. M.I. PIPE | |
| 2 | 6908046 | RING, R52-S | |
| 12 | 7000486-10 | CAPSCREW, 7/8″ X 3-1/4″ CAD PLT HEX HEAD GR5 | |
| 12 | 7000490-10 | CAPSCREW, 7/8″ X 4-1/4″ HEX HEAD GR5 | |
| 1290208 | DAMPENER, SUCTION LINE FOR FIELD INSTALLATION TO EXISTING 10″ PIPE | ||
| 1 | 1290209 | PLATE, MOUNTING | |
| 1292233 | DAMPENER, SUCTION LINE FOR FIELD INSTALLATION TO EXISTING 12″ PIPE | ||
| 1 | 1292234 | PLATE, MOUNTING | |
| LINER FLUSHING SYSTEM (ELECTRIC MOTOR DRIVE) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1292290 | LINER FLUSHING SYSTEM (INCLUDES THE FOLLOWING EXCEPT ITEMS 2 & 26) | ||
| 1292310 | LINER FLUSHING SYSTEM (INCLUDES THE FOLLOWING EXCEPT ITEMS 1 & 25) | ||
| 1 | 1 | 1292288 | PUMP COMPLETE (INCLUDES ITEMS 3 THRU 25) |
| 2 | 1 | 1292309 | PUMP COMPLETE (INCLUDES ITEMS 3 THRU 24 & 26) |
| 3 | 1 | 1292285 | BASE, PUMP AND MOTOR |
| 4 | 1 | 1292286 | GUARD, DRIVE SHAFT |
| 5 | 4 | 1292283 | SHIM, PUMP |
| 6 | 1 | 2401860 | KEY (1/4″ X 1/4″ X 1-1/4″ LG.) |
| 7 | 1 | 2401860 | KEY (1/4″ X 1/4″ X 1-1/4″ LG.) |
| 8 | 1 | 5902172 | FLANGE, 1-1/2″ A.S.A. 150# THREADED FLAT FACE |
| 9 | 1 | 5902091 | FLANGE, 1″ A.S.A. 150# THREADED FLAT FACE |
| 10 | 1 | 6010036 | GASKET, 1-1/2″ 150# FULL FACE FLANGE |
| 11 | 1 | 6010037 | GASKET, 1″ 150# FULL FACE FLANGE |
| 12 | 4 | 6300062 | NUT, 3/8″ CAD. PLATED HEX |
| 13 | 8 | 6300081 | NUT, 1/2″ CAD. PLATED HEX |
| 14 | 4 | 7000207-11 | CAPSCREW, 3/8″ X 7/8″ LG. CAD. PLTD GR5 HEX HEAD |
| 15 | 4 | 7000211-11 | CAPSCREW, 3/8″ X 1-3/4″ LG. CAD. PLTD GR5 HEX HEAD |
| 16 | 4 | 7000307-11 | CAPSCREW, 1/2″ X 2″ LG. CAD. PLTD GR5 HEX HEAD |
| 17 | 4 | 7000309-11 | CAPSCREW, 1/2″ X 2-1/4″ LG. CAD. PLTD GR5 HEX HEAD |
| 18 | 4 | 7000396-11 | CAPSCREW, 5/8″ X 1-3/4″ LG. CAD. PLTD GR5 HEX HEAD |
| 19 | 4 | 7600026 | WASHER, 3/8″ TYPE “A” |
| 20 | 4 | 1292293 | WASHER, 1/4″ 1-3/4″ SQUARE |
| 21 | 4 | 7619041 | WASHER, 3/8″ REG. CAD. PLTD SPRING LOCK |
| 22 | 8 | 7619050 | WASHER, 1/2″ REG. CAD. PLTD SPRING LOCK |
| 23 | 1 | 7802327 | COUPLING |
| 24 | 1 | 7815147 | PUMP, 1″ X 1-1/2″ CENTRIFUGAL |
| 25 | 1 | 7812008 | MOTOR, ELECTRIC |
| 26 | 1 | 7812009 | MOTOR, ELECTRIC |
| 27 | 1 | 1284036 | HOSE, 1″ X 18″ LG. (FOR REAR MOUNT PUMP DRIVE) |
| 1 | 1282036 | HOSE, 1″ X 30″ LG. (FOR TOP MOUNT PUMP DRIVE) | |
| 28 | 2 | 1292284 | SUPPORT, MOTOR & PUMP |
| 29 | 1 | 1292294 | HOSE, 1-1/2″ X 26″ LG. (FOR REAR MOUNT PUMP DRIVE) |
| 1 | 1292292 | HOSE, 1-1/2″ X 37″ LG. (FOR TOP MOUNT PUMP DRIVE) | |
| 30 | 4 | 6310120 | NUT, 3/4″ – 10 UNC FLEXLOC |
| 31 | 1 | 6800081 | BUSHING, 1″ X 1/4″ M.I. 150# BLK. HEX PIPE |
| 32 | 1 | 6817077 | NIPPLE, 1″ X 3-1/2″ STD. BLK. PIPE |
| 33 | 1 | 6829008 | ELBOW, 1″ X 90° M.I. 150# STREET |
| 34 | 1 | 6839008 | ELBOW, 1″ X 45° M.I. 150# STREET |
| 35 | 1 | 6859008 | CROSS, 1″ 150# PIPE |
| 36 | 1 | 6873008 | PLUG, 1″ CORED SQUARE HEAD PIPE |
| 37 | 4 | 7000439-11 | CAPSCREW, 3/4″ X 1-3/4″ GR. 5 CAD. PLTD HEX HEAD |
| 38 | 4 | 7621044 | WASHER, 3/4″ TYPE “A” CAD. PLTD |
| 39 | 1 | 7800070 | ADAPTER, MALE PIPE |
| 40 | 1 | 7806002 | GAUGE (0-100 P.S.I.), 2-1/2″ PRESSURE |
| LINER FLUSHING SYSTEM (RIGHT ANGLE DRIVE) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1 | 1 | G1291157 | PUMP AND GEAR BOX COMPLETE |
| 2 | 2 | G1292319 | BRACKET, PUMP MOUNTING |
| 3 | 1 | G1291258 | COVER, CROSS SHAFT |
| 4 | 4 | 1293064 | BLOCK, LUGUARD MOUNTING |
| 5 | 1 | G1292320 | SHEAVE, LUBRICATION PUMP |
| 6 | 1 | 1292098 | CAP, PINION SHAFT END |
| 7 | 1 | G1292317 | GUARD (LEFT HAND), “V” – BELT |
| 1 | G1292318 | GUARD (RIGHT HAND), “V” – BELT | |
| 8 | 1 | G1290380 | GUARD (LEFT HAND), SHEAVE |
| 1 | G1290381 | GUARD (RIGHT HAND), SHEAVE | |
| 9 | 1 | 1290293 | BLOCK, ADJUSTING SCREW |
| 10 | 1 | 2401860 | KEY (1/4″ X 1/4″ X 1-1/4″) |
| 11 | 1 | G-4730030-2 | BELT, 2/3V 1400 HC POWER BAND |
| 12 | 1 | 6100036 | HOSE, 1″ X 40″ |
| 13 | 1 | 6100037 | HOSE, 1-1/2″ X 46″ |
| 14 | 4 | 6300103 | NUT, 5/8″ – 11 UNC CAD. PLATED HEX |
| 15 | 1 | 6800081 | BUSHING, 1″ X 1/4 M.I. STD BLK HEX PIPE |
| 16 | 1 | 6817076 | NIPPLE, 1″ X 3″ STD. STEEL PIPE |
| 17 | 1 | 6817078 | NIPPLE, 1″ X 4″ STD. STEEL PIPE |
| 18 | 1 | 6817112 | NIPPLE, 1-1/2 X 4″ STD. STEEL PIPE |
| 19 | 1 | 6826008 | ELBOW, 1″ X 90° STD. M.I. PIPE |
| 20 | 1 | 6828012 | ELBOW, 1-1/2″ X 45° STD. M.I. PIPE |
| 21 | 1 | 6829008 | ELBOW, 1″ X 90° STD. M.I. PIPE STREET |
| 22 | 1 | 6839008 | ELBOW, 1″ X 45° STD. M.I. PIPE STREET |
| 23 | 1 | 6888088 | TEE, 1″ STD. M.I. PIPE |
| 24 | 1 | G7200052 | SHEAVE WITH HUB, 4.12″ O.D. 2/3V GROOVE |
| 25 | 2 | G-7000254-11 | CAPSCREW, 7/16″ X 3/4″ CAD. PLT HEX HEAD GR5 |
| 26 | 4 | 7000301-11 | CAPSCREW, 1/2″ X 3/4″ CAD. PLT HEX HEAD GR5 |
| 27 | 4 | 7000397-11 | CAPSCREW, 5/8″ X 2″ CAD. PLT HEX HEAD GR5 |
| 28 | 2 | 7027206-02 | SETSCREW, 3/8″ X 3/4″ SOCKET HEX HEAD CUP POINT |
| 29 | 2 | 7619045 | WASHER, 7/16″ CAD. PLATED SPRING LOCK |
| 30 | 4 | 7619058 | WASHER, 5/8″ CAD. PLATED SPRING LOCK |
| 31 | 4 | 7621032 | WASHER, 1/2″ CAD. PLATED TYPE “A” |
| 32 | 4 | 7621042 | WASHER, 5/8″ CAD. PLATED TYPE “A” |
| 33 | 2 | 7800076 | ADAPTER, 1″ MALE HOSE |
| 34 | 2 | 7802358 | CONNECTOR, 1-1/2″ MALE HOSE |
| 35 | 2 | 7805072 | SWIVEL, 1-1/2″ FEMALE HOSE |
| 36 | 2 | 7805083 | SWIVEL, 1″ FEMALE HOSE |
| 37 | 1 | 7806002 | GUAGE (0-100 P.S.I.), PRESSURE |
| 38 | 1 | 7016421 | SETSCREW, 5/8″ X 8″ SQUARE HEAD CUP POINT |
| 39 | 2 | 7014456-01 | SETSCREW, 3/4″ X 6″ SQUARE HEAD CUP POINT |
| 40 | 2 | 6320120 | NUT, 3/4″ HEX JAM |
| 41 | 1 | 6320100 | NUT, 5/8″ HEX JAM |
| 42 | 4 | 6300103 | NUT, 5/8″ HEX CAD PLT |
| 43 | 4 | 7000397-11 | CAPSCREW, 5/8″ X 2″ CAD PLT HEX HD GR5 |
| 44 | 4 | 7619058 | WASHER, 5/8″ CAD PLATED SPRING LOCK |
| 45 | 4 | 7621042 | WASHER, 5/8″ W TYPE A CAD PLATED |
| LINER FLUSHING PUMP AND RIGHT ANGLE GEARBOX ASSEMBLY G-1291157 | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1 | 1 | G1291158 | BRACKET, PUMP AND GEAR BOX MOUNTING |
| 2 | 1 | G1291159 | PEDESTAL, GEAR BOX |
| 3 | 4 | G1292283 | SHIM, PUMP |
| 4 | 1 | 1292266 | GUARD, COUPLING |
| 5 | 2 | 2401860 | KEY (1/4″ X 1/4″ 1-1/4″) |
| 6 | 1 | 5902091 | FLANGE, 1″ A.S.A. 150# THREADED FLAT FACE |
| 7 | 1 | 5902172 | FLANGE, 1-1/2″ A.S.A. 150# THREADED FLAT FACE |
| 8 | 1 | 6010036 | GASKET, 1-1/2″ 150# FLANGE |
| 9 | 1 | 6010037 | GASKET, 1″ 150# FLANGE |
| 10 | 10 | 6300081 | NUT, 1/2″ CAD. PLATED HEX |
| 11 | 4 | 6300103 | NUT, 5/8″ – 11 UNC CAD. PLATED HEX |
| 12 | 4 | 7000206-11 | CAPSCREW, 3/8″ X 3/4″ CAD. PLT HEX HEAD GR5 |
| 13 | 4 | 7000211-11 | CAPSCREW, 3/8″ X 1-3/4″ CAD. PLT HEX HEAD GR5 |
| 14 | 2 | 7000306-11 | CAPSCREW, 1/2″ X 1-3/4″ CAD. PLT HEX HEAD GR5 |
| 15 | 4 | 7000307-11 | CAPSCREW, 1/2″ X 2″ CAD. PLT HEX HEAD GR5 |
| 16 | 4 | 7000309-11 | CAPSCREW, 1/2″ X 2-1/4″ CAD. PLT HEX HEAD GR5 |
| 17 | 4 | 7000398011 | CAPSCREW, 5/8″ X 2-1/4″ CAD. PLT HEX HEAD GR5 |
| 18 | 4 | 7619041 | WASHER, 3/8″ CAD. PLATED SPRING LOCK |
| 19 | 10 | 7619050 | WASHER, 1/2″ CAD. PLATED SPRING LOCK |
| 20 | 4 | 7619058 | WASHER, 5/8″ CAD. PLATED SPRING LOCK |
| 21 | 4 | 7621024 | WASHER, 3/8″ CAD. PLATED TYPE “A” |
| 22 | 4 | G7624021 | WASHER, 1/2″ I.D. X 1-1/4″ O.D. X .217″ THICK FLAT |
| 23 | 1 | G7802332 | COUPLING |
| 24 | 1 | 7806091 | BOX, GEAR |
| 25 | 1 | 7815147 | PUMP, 1″ X 1-1/2″ CENTRIFUGAL |
| 26 | 1 | 7801121 | BREATHER |
| STRAINER CROSS ASSEMBLIES (OPTIONAL EQUIPMENT) | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1292215 | CROSS COMPLETE, STRAINER (WITH 6″ 5000# DISCHARGE FLANGE) | ||
| 1 | 1 | 1292216 | CROSS |
| 2 | 1 | 1292219 | STRAINER |
| 3 | 24 | 2408000 | STUD, 1-3/8″ X 7-1/2″ BOTTOM TAPER LOCK |
| 4 | 8 | 2403070 | STUD, 1-1/2″ X 7-1/4″ BOTTOM TAPER LOCK |
| 5 | 24 | 6300220 | NUT, 1-3/8″ HEAVY HEX |
| 6 | 8 | 6300240 | NUT, 1-1/2″ HEAVY HEX |
| 7 | 4 | 1028421 | SHIM (.125″ THICK) |
| 8 | 3 | 102842-2 | SHIM (.0625″ THICK) |
| 9 | 4 | 102842-3 | SHIM (.0312″ THICK) |
| 10 | 1 | 1290221 | PLATE, BASE |
| 11 | 1 | 1292218 | SUPPORT |
| 12 | 4 | 7000439-11 | CAPSCREW, 3/4″ X 1-3/4″ CAD. PLT HEX HEAD GR5 |
| 13 | 4 | 7000440-11 | CAPSCREW, 3/4″ X 2″ CAD. PLT HEX HEAD GR5 |
| 14 | 8 | 7619066 | WASHER, 3/4″ CAD. PLATED SPRING LOCK |
| 15 | 1 | G-2407004 | TAG, STRAINER CLEAN-OUT |
| 16 | 2 | 7178088 | SCREW, NO. 10 X 3/8″ TYPE “U” ROUND HEAD DRIVE |
| 1 | 1292223 | KIT, FLANGE AND GASKET (CONSISTS OF THE FOLLOWING) | |
| 1 | 1292222 | FLANGE, STRAINER CLEAN-OUT | |
| 1 | 5912400 | FLANGE, 6″ A.P.I. 5000# RING JOINT WELD NECK | |
| 1 | 6908033 | RING, R39-S OVAL JOINT | |
| 1 | 6908040 | RING, R44-S OVAL JOINT | |
| 2 | 6908044 | RING, R46-S OVAL JOINT | |
| 1292225 | CROSS COMPLETE, STRAINER (WITH 5″ – 5000# DISCHARGE FLANGE) | ||
| 1 | 1 | 1292226 | GROSS |
| 2 | 1 | 1292219 | STRAINER |
| 3 | 24 | 2403070 | STUD, 1-1/2″ X 7-1/4″ BOTTOM TAPER LOCK |
| 5 | 24 | 6300240 | NUT, 1-1/2″ HEAVY HEX |
| 7 | 4 | 102842-1 | SHIM (.125″ THICK) |
| 8 | 3 | 102842-2 | SHIM (.0625″ THICK) |
| 9 | 4 | 102842-3 | SHIM (.0312″ THICK) |
| 10 | 1 | 1290221 | PLATE, BASE |
| 11 | 1 | 1292218 | SUPPORT |
| 12 | 4 | 7000439-11 | CAPSCREW, 3/4″ X 1-3/4″ CAD PLT HEX HEAD GR5 |
| 13 | 4 | 7000440-11 | CAPSCREW, 3/4″ X 2″ CAD PLT HEX HEAD GR5 |
| 14 | 8 | 7619066 | WASHER, 3/4″ CAD PLATED SPRING LOCK |
| 15 | 1 | G-2407004 | TAG, STRAINER CLEAN-OUT |
| 16 | 2 | 7178088 | SCREW, NO. 10 X 3/8″ TYPE “U” ROUND HEAD DRIVE |
| 1 | 1292229 | KIT, FLANGE AND GASKET (CONSISTS OF THE FOLLOWING) | |
| 1 | 1292222 | FLANGE, STRAINER CLEAN-OUT | |
| 2 | 5912391 | RING, 5″ API 5000# RING JOINT WELD NECK | |
| 1 | 6908033 | RING, R39-S OVAL JOINT | |
| 3 | 6908040 | RING, R44-S OVAL JOINT | |
| TOOLS FURNISHED – NOT ILLUSTRATED | |||
| ITEM | REQ | PART NO. | DESCRIPTION |
| 1 | 1290140 | ADAPTER, PINION ROTATING | |
| 3 | 7000394-11 | CAPSCREW, 5/8″ X 1-1/4″ CAD. PLATED HEX HEAD GR5 | |
| 3 | 7619058 | WASHER, 5/8″ CAD. PLATED SPRING LOCK | |
| 1 | 2402290 | WRENCH, (FOR 1290140 ADAPTER) | |
| 1 | 1290183 | PULLER, SEAL RETAINER | |
| 1 | 1290207 | BOLT, LINER CLAMP TEE HANDLE LIFTING (4″ LONG) | |
| 1 | 1290206 | BOLT, LINER CLAMP TEE HANDLE LIFTING (3″ LONG) | |
| 1 | M-1060 | PULLER, VALVE SEAT | |
| 1 | M-1098 | HEAD, VALVE SEAT PULLER | |
| 1 | 1292127 | DRIVER, VALVE SEAT | |
| 1 | 1292278 | HOLDER, SEAL RETAINER | |
| 1 | 1291356 | BAR, WEDGE LOOSENING | |
| 1 | 2409013 | WRENCH, WEDGE ADJUSTING SCREW | |
| 1 | 2409011 | WRENCH, (FOR 2409013 WRENCH) | |
| 1 | 1292164 | PLATE, BUSHING PULLER | |
| 1 | 1292125 | HOIST COMPLETE (CONSISTS OF THE FOLLOWING) | |
| 1 | 1 | 1292126 | BOOM |
| 2 | 1 | 1290127 | BRACKET |
| 3 | 1 | 1292128 | MAST |
| 4 | 2 | 1292129 | ROD |
| 5 | 4 | 7800044 | PIN, YOKE |
| 6 | 4 | 7804019 | YOKE, ADJUSTABLE |
| 7 | 1 | 7805052 | FITTING, 1/8″ HYDRAULIC GREASE |
| 8 | 4 | 6320120 | NUT, 3/4″ HEX JAM |
| 9 | 2 | 7000395-11 | CAPSCREW, 5/8″ X 1-1/2″ HEX HEAD CAD. PLT GR5 |
| 10 | 2 | 7000440-11 | CAPSCREW, 3/4″ X 2″ HEX HEAD CAD. PLT GR5 |
| 11 | 2 | 7619058 | WASHER, 5/8″ SPRING LOCK |
| 12 | 2 | 7619066 | WASHER, 3/4″ SPRING LOCK |
| 13 | 1 | 7819040 | TROLLEY |
Contact:Mr Liu
Mobile:15869109368
Tel:86-571-89967020
E-mail:info@dawopu.com
Address:No151 ,ZiDingXiang Rd, Hangzhou. Zhejiang Province, China