welcomeDawopu Group
Language selection:
∷
∷
∷
| Halliburton HT-400 Triplex Plunger Mud Pump Parts List | |||
| Worm Gear Drive-End Assembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100007816 | 316.11631 | 2 | Gasket, Worm Housing Input End |
| 100058137 | 316.11619 | 1 | Retainer, Bearing, Worm-Drive End |
| 100058140 | 316.11625 | 1 | Bearing, Drive End-Worm Shaft |
| 100058139 | 316.11620 | 1 | Inner Race for 316.11625 |
| 100029186 | 70.46241 | 1 | Seal, Oil, 53-in. x 7448, Fl, 4-in. B x 5 1/2-in. OD x 1/2-in. Wide |
| 100058134 | 316.11615 | 1 | Cover, Oil Seal Retainer |
| 100029874 | 70.58806 | 4 | Washer, Flat, 3/8-in. WI, Pl |
| 13431 | 70.43839 | 4 | Screw Hex Socket, 3/8-in.16NC x 1 1/4-in., Unbrako/Loc-Wel |
| 100054533 | 280.03021 | 1 | Flange, Companion, 1810 Series, 3.0 – 10 Spline |
| 100058133 | 316.11613 | 1 | Washer, Worm Yoke Retainer |
| 100058132 | 316.11611 | 1 | Washer, Lock, Worm Yoke Retainer |
| 100028455 | 70.43816 | 2 | Screw, Hex Cap, 3/8-in. 16UNC x 1 1/4-in., Pl |
| Cone Drive (8.4:1) Worm Gear Thrust End Assembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058310 | 316.16416 | 1 | Plug, Orifice, 1/8-in. NPT, 0.157-in. Diameter Hole |
| 100028380 | 70.43680 | 12 | Screw, Hex Socket, 1/2-in. 13UNC x 5 1/2-in., Drilled Head |
| 100058235 | 316.13200 | 1 | Plate, thrust, bearing retainer modified for plunger lube pump |
| 100015435 | 8.34062 | 2 | O-Ring, 90D, 8, 7 3/4-in. x 1/8-in. |
| 100011748 | 317.51064 | 1 | Adapter, HQ, Worm Shaft, Plunger Lube |
| 100058150 | 316.11667 | as req. | Shim, Clearance, Worm Thrust Bearing, 0.003 in. |
| 100011686 | 316.11669 | as req. | Shim, Clearance, Worm Thrust Bearing, 0.005 in. |
| 100011687 | 316.11671 | as req. | Shim, Clearance, Worm Thrust Bearing, 0.010 in. |
| 100011688 | 316.11673 | as req. | Shim, Clearance, Worm Thrust Bearing, 0.020 in. |
| 100058210 | 316.13100 | 1 | Nut, Lock, HT400, worm thrust end, nut and star washer |
| 100058142 | 316.11629 | 1 | Bearing, Thrust, Stack Worm |
| 100058144 | 316.11633 | 1 | Bushing, Worm Thurst Bearing |
| 100058145 | 316.11634 | 1 | Key, Worm-Thrust Bearing |
| 100058141 | 316.11627 | 1 | Bearing, Thrust-End, Worm Shaft |
| 100058147 | 316.11645 | 1 | Retainer, Iron Worm-Thrust End Bearing |
| 100015435 | 8.34062 | 2 | O-Ring, 90D, 8, 7 3/4-in. x 1/8-in. |
| 100058249 | 316.13253 | as req. | Shim, 0.005-in., Worm Positioning |
| 100058250 | 316.13254 | as req. | Shim, 0.010-in., Worm Positioning |
| 100058251 | 316.13255 | as req. | Shim, 0.020-in., Worm Positioning |
| 100057938 | 315.31154 | 1 | Key, Worm-Thrust Bearing Spacer |
| 100058285 | 316.13522 | 1 | Worm, Gear, 8.4 to 1 Ratio, Cone Drive |
| Holroyd (8.6:1) Worm Gear Thrust-End Assembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100011699 | 316.13657 | 8 | Screw, Cap, Worm Housing, RH |
| 100012919 | 70.32821 | 4 | Nut, Elastic Stop, 1/2-13 NC, Heavy, PL |
| 100011684 | 316.11637 | 1 | Pump, Assembly, Oil, 100 GPM, Tuthill, HT-400™ PE |
| 100058267 | 316.13306 | 4 | Stud, Long Loc Insert, Tuthill Oil Pump Mounting |
| 100013727 | 8.34061 | 1 | O-Ring, 90 Duro 7 3/4 X 7 1/2 X 1/8, 568-264 |
| 100058150 | 316.11667 | as req. | Shim, Clearance, Worm Thrust Bearing, 0.003 in. |
| 100011686 | 316.11669 | as req. | Shim, Clearance, Worm Thrust Bearing, 0.005 in. |
| 100011687 | 316.11671 | as req. | Shim, Clearance, Worm Thrust Bearing, 0.010 in. |
| 100011688 | 316.11673 | as req. | Shim, Clearance, Worm Thrust Bearing, 0.020 in. |
| 100058210 | 316.13100 | 1 | Nut, Lock, HT400, Worm Thrust End, Nut and Star Washer |
| 100058146 | 316.11644 | 1 | Adapter, Brown and Sharp Lubricator Pump |
| 100058142 | 316.11629 | 1 | Bearing, Thrust, Stack Worm |
| 100058144 | 316.11633 | 1 | Bushing, Worm Thurst Bearing |
| 100058145 | 316.11634 | 1 | Key, Worm-Thrust Bearing |
| 100058141 | 316.11627 | 1 | Bearing, Thrust-End, Worm Shaft |
| 100058147 | 316.11645 | 1 | Retainer, Iron Worm-Thrust End Bearing |
| 100015435 | 8.34062 | 1 | O-Ring, 90D, 8, 7 3/4-in. x 1/8-in. |
| 100057938 | 315.31154 | 1 | Key, Worm-Thrust Bearing Spacer |
| 100058130 | 316.11601 | 1 | Gear, Worm, 8.6:1 Ratio, Holroyd, HT-400™ PE |
| Ring Gear Subassembly (A) | |||
| SAP PN | Legacy No. | Qty | Description |
| 100027204 | 100058121 | 1 | Pin, Cotter, 1/8-in. x 1 1/2-in., Spring Steel |
| 100026544 | 70.32970 | 1 | Nut, Hex Slot, 1-in. 14NF, Pl |
| 100058092 | 316.11407 | 4 | Screw, Cap, Spline Drive |
| 100030594 | 70.62391 | 1 | Wire, Stove Pipe, 19 Ga., 72-in. Long |
| 100058107 | 316.11521 | 1 | Spider, Crankshaft Thrust Retainer |
| 100058105 | 316.11519 | 1 | Bushing, Spider Spacer |
| 100058100 | 316.11512 | as req. | Shim, Positioning, Crankshaft Axial, 0.020-in. |
| 100058104 | 316.11518 | as req. | Shim, Positioning, Crankshaft Axial, 0.040-in. |
| 100058109 | 316.11522 | as req. | Shim, Positioning, Crankshaft Axial, 0.060-in. |
| 100058110 | 316.11523 | 1 | Coupling, Crankshaft, Spline Drive |
| 100030594 | 70.62391 | 1 | Wire, Stove Pipe, 19 Ga., 190-in. Long |
| 100058111 | 316.11524 | 24 | Screw, Cap, Ring, Mounting, Gear Clamp |
| 100058125 | 316.11548 | 24 | Washer, Left-Hand Gear Bearing Clamp |
| 100028108 | 70.42965 | 1 | Rod, Welding, L-61, 1/8-in., 95-in. Long |
| 100023759 | 70.17324 | 1 | Connector, No. 8, 128-B Reliance |
| 100058127 | 316.11551 | 1 | Flange, Gear Spline Drive |
| 100058128 | 316.11553 | 1 | Adapter, Clamp Ring, HT-400™, PE, Right-Hand Only |
| 100011699 | 316.13657 | 16 | Screw, Cap, Worm Housing, Right-Hand |
| 100030594 | 70.62391 | 1 | Wire, Stove Pipe, 19 Ga., 120-in. Long |
| 100058123 | 316.11545 | 1 | Ring, Thrust, Gear Bearing |
| 100058117 | 316.11535 | as req. | Shim, Clearance, Gear Support Bearing, 0.003-in. |
| 100058118 | 316.11537 | as req. | Shim, Clearance, Gear Support Bearing, 0.005-in. |
| 100058119 | 316.11539 | as req. | Shim, Clearance, Gear Support Bearing, 0.010-in. |
| 100058121 | 316.11541 | as req. | Shim, Clearance, Gear Support Bearing, 0.020-in. |
| Ring Gear Subassembly (B) | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058122 | 316.11543 | 1 | Bearing, Gear Support |
| 100058120 | 316.1154 | 2 | Thrust Cage Assembly for 316.11543 |
| 100058284 | 316.13521 | 1 | Gear, Ring, 8.4 to 1 Ratio, Cone Drive Use only with Cone Drive worm gear (100058285). |
| 100058103 | 316.11517 | 1 | Gear, Ring, 8.6 to 1 Ratio Holroyd Use only with Holroyd worm gear (100058130) |
| 100058129 | 316.11556 | 24 | Lug, Gear Bearing Clamp, Right Hand Only |
| 100028108 | 70.42965 | 1 | Rod, Welding, L-61, 1/8-in., 95-in. Long, Right Hand Only |
| 100058111 | 316.11524 | 24 | Screw, Cap, Ring Mounting, Gear Clamp, Right Hand Only |
| 100023759 | 70.17324 | 1 | Connector, No. 8, 128-B Reliance, Right Hand Only |
| 100028247 | 70.43381 | 16 | Screw, Hex Socket, 1/2-in. 13NC x 1 1/4-in. |
| 100029934 | 70.58986 | 16 | Washer, Lock, 1/2-in., Int Shakeproof, Pl |
| 100058112 | 316.11525 | 1 | Support, Bearing, Ring Gear |
| 100058113 | 316.11527 | as req. | Shim, Positioning, Gear Side, 0.003-in. |
| 100058114 | 316.11529 | as req. | Shim, Positioning, Gear Side, 0.005-in. |
| 100058115 | 316.11531 | as req. | Shim, Positioning, Gear Side, 0.010-in. |
| 100058116 | 316.11533 | as req. | Shim, Positioning, Gear Side, 0.020-in. |
| 100058092 | 316.11407 | 2 | Screw, Cap, Spline Drive |
| 100030594 | 70.62391 | 1 | Wire, Stove Pipe, 19 Ga., 24-in. Long |
| 100081184 | 70.58959 | 4 | Washer, Lock, 1/2-in., Stl-Pl |
| 100058101 | 316.11514 | 1 | Stud, Flanged, Crankshaft Thrust |
| 100028108 | 70.42965 | 1 | Rod, Welding, L-61, 1/8-in., 54-in. Long, Right Hand Only |
| Crankshaft Main Bearing Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058283 | 316.13503 | 2 | Bearing, Main Outboard |
| 100058282 | 316.13501 | 2 | Bearing, Main Inboard |
| 101384369 | 4 | Washer, Flat, SAE 5/16, 11/32 ID, 11/16 OD, 1/16 Thk, Stl | |
| 100058709 | 317.51017 | 12 | Washer, Outer Race, Crankshaft, Main Bearing, HQ |
| 100002166 | 70.43363 | 4 | Screw, Hex Socket, 5/16-in. 18NC x 1-in. |
| 100026483 | 70.32811 | 4 | Nut, Elastic Stop, 5/16-in. 18NC, Heavy, Pl |
| 100058266 | 316.13304 | 4 | Screw, Cap, Inboard Bearing Race Retainer |
| 100028496 | 70.43877 | 3 | Screw, Hex Cap, 1/2-in. 13NC x 2 3/4-in. |
| 100058095 | 316.11505 | 15 | Washer, Bearing Retainer, Forged |
| 100058233 | 316.13198 | 6 | Washer, Retainer, Inner Race, Heavy-Duty Main Bearing |
| 100030907 | 70.70309 | 12 | Nut, Self-Locking, 1/2-in. 13NC x 3 1/2-in., Pl |
| 100028494 | 70.43875 | 6 | Screw, Hex Cap, 1/2-in. 13NC x 3 1/2-in., Pl |
| 100058898 | 317.55208 | 1 | Crankshaft Assembly, Machined, +0.125, No Nitride |
| Crosshead and Connecting Rod Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100138092 | 70.4319 | 18 | Screw, FH Cap, 1/4-in. 20NC x 5/8-in., Hex Socket |
| 100058170 | 316.11819 | 3 | Shoe Top, Crosshead |
| 100058172 | 316.11823 | as req | Shim, Crosshead Shoe, Top, 0.003-in. |
| 100058171 | 316.11821 | as req | Shim, Crosshead Shoe, Top, 0.005-in. |
| 100058173 | 316.11825 | as req | Shim, Crosshead Shoe, Top, 0.010-in. |
| 100058174 | 316.11827 | as req | Shim, Crosshead Shoe, Top, 0.020-in. |
| 100002817 | 316.13811 | 3 | Crosshead, Heavy Duty |
| 100058180 | 316.11847 | Shim, Bottom Crosshead, 0.005-in. | |
| 100058181 | 316.11848 | Shim, Bottom Crosshead, 0.010-in. | |
| 100058175 | 316.11832 | 3 | Shoe Bottom, Crosshead |
| 100026445 | 70.32721 | 3 | Nut, Elastic Stop, 5/16-in. 24NF, LT, 21NE-054 |
| 100058176 | 316.11833 | 3 | Screw, Cap, Retaining, Crosshead Pin |
| 100057933 | 315.1193 | 6 | Washer, Dished |
| 100011690 | 316.11831 | 6 | Key, Crosshead Pin |
| 100002813 | 316.11829 | 3 | Pin, Crosshead |
| 100011691 | 316.11910 | 3 | Connecting Rod, Forging, Machined |
| 100058186 | 316.11913 | 3 | Bushing, Connecting-Rod Pin |
| 100058184 | 316.11911 | 12 | Screw, Connecting-Rod |
| 100058185 | 316.11912 | 12 | Washer, Connecting-Rod Cap |
| 100025800 | 70.27196 | 12 | Helicoil Insert, No. 1185, 12-in. x 1 7/8-in. Long |
| 100011758 | 317.55214 | 3 | Bearing, Bottom, Connecting Rod, + 0.125, HQ2000 |
| 100011759 | 317.55215 | 3 | Bearing, Top, Connecting Rod, + 0.125, HQ2000 |
| 100057932 | 315.11416 | 3 | Dowel, Connecting-Rod Cap |
| 100030594 | 70.62391 | 1 | Wire, Stove Pipe, 19 Ga., 144-in. Long |
| Crosshead Slide Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100028805 | 70.44781 | 8 | Screw, Set, 1/4-in. 20NC x 1/4-in., Cup Pt, Hex Socket, Pl |
| 100028806 | 70.44782 | 8 | Screw, Set, 1/4-in. 20NC x 3/4-in., Cup Pt, Hex Socket, Pl |
| 100058286 | 316.13802 | 4 | Clamp, Outboard, Crosshead Slide |
| 100058164 | 316.11805 | 4 | Foot, Right-Hand Crosshead Slide Clamp |
| 100058166 | 316.11807 | 4 | Screw, Crosshead Slide Clamp |
| 100058169 | 316.11817 | 4 | Foot, Left-Hand Crosshead Slide Clamp |
| 100058161 | 316.11801 | 3 | Slide, Top Crosshead |
| 100058162 | 316.11803 | 3 | Slide-Bottom, Crosshead |
| 100058177 | 316.11834 | as req | Shim, Crosshead Slide, 0.002-in. |
| 100058178 | 316.11835 | as req | Shim, Crosshead Slide, 0.005-in. |
| 100058179 | 316.11836 | as req | Shim, Crosshead Slide, 0.010-in. |
| Schroeder Filter/Strainer Lubrication Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058197 | 316.11964 | 1 | Cap, By-Pass, Schroeder Oil System |
| 100058198 | 316.11965 | 1 | Screw, Adjust, Bypass, Schroeder Oil System |
| 100011694 | 316.11932 | 1 | Spring, Bypass, Oil Pressure 80 to 100 psi |
| 100058200 | 316.11966 | 1 | Gasket, Cap, Screw, Bypass, Schroeder Oil Systems |
| 100001377 | 70.00427 | 1 | Ball, Steel, 2-in., Chrome Steel, Grade 50 |
| 100058195 | 316.11963 | 1 | Body, Valve, Bypass, Schroeder Oil System |
| 100028439 | 70.43786 | 6 | Screw, Hex Cap, 5/16-in.18NC x 1-in., Plated |
| 100015040 | 70.58952 | 8 | Washer, Lock, 5/16-in., Stl, Pl |
| 100000966 | 8.34031 | 2 | O-Ring, 90D, 3 1/4-in. x 3-in. x 1/8-in. |
| 100029873 | 70.58805 | 6 | Washer, Flat, 5/16-in., Wi, Pl |
| 100058193 | 316.11959 | 1 | Manifold, Oil Strainer and Filter, Machined |
| 100028485 | 70.43864 | 16 | Screw, Hex Cap, 1/2-in.13NC x 1-in., Pl |
| 100081184 | 70.58959 | 16 | Washer, Lock, 1/2-in., Stl, Pl |
| 100021413 | 70.06262 | 1 | Strainer, Oil, Magnetic Element, 100 gpm, 300 psi |
| 100021412 | 70.06260 | 1 | Filter, Oil, 100 gpm, 300 psi |
| 100000961 | 8.34022 | 4 | O-Ring, 90D, 2 1/8-in. x 1 7/8-in. x 1/8-in. |
| 100024782 | 70.23477 | 4 | Flange, Half, 1 1/2-in., 3,000 psi, SF-2522-24 |
| 100036060 | 70.97198 | 1 | Adapter, Hose, Straight, 1 5/8-12 JIC Male x 1.5 C61 Flange Head |
| 100058298 | 316.14147 | 1 | Bracket, Schroeder, Filter |
| 100023268 | 70.15975 | 1 | Clamp, Exhaust, 4 1/2-in., Stemco |
| 100028435 | 70.43781 | 4 | Screw-Hex Cap, 5/16-in. 18NC x 1/2-in., Pl |
| 100013115 | 70.76708 | 35 | Washer, Seal, 5/16-in., Barwood |
| Power-End Lubrication Hose/Line Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002493 | 70.88352 | 1 | Gauge, Oil Pressure, 0 to 150 lb, Microswitch |
| 100049565 | 270.08673 | 1 | Bracket, Heat Indicator, Murphy Gauge |
| 100058080 | 316.11188 | 1 | Bracket, Gauge, Oil Temp and Press-Schroeder |
| 100013017 | 70.43814 | 2 | Screw, Hex Cap, 3/8-in. 16NC x 1-in., Pl |
| 100013059 | 70.58955 | 2 | Washer, Lock, 3/8-in., Stl, Pl |
| 100029874 | 70.58806 | 2 | Washer, Flat, 3/8-in. WI, Pl |
| 100012921 | 70.32912 | 2 | Nut, Hex, 3/8-in. 16NC, Pl |
| 100028488 | 70.43868 | 2 | Screw, Hex Cap, 1/2-in.13NC x 1 1/2-in., Pl |
| 100081184 | 70.58959 | 2 | Washer, Lock, 1/2-in., Stl, Pl |
| 100026525 | 70.32914 | 2 | Nut, Hex, 1/2-in. 13NC, Pl |
| 100058261 | 316.1328 | 1 | Hose Assembly, Lube Pressure, HT-400™ Power End |
| 100058262 | 316.13282 | 1 | Hose Assembly, Gear Support Bearing Lube, HT-400™ Power End |
| 100058263 | 316.13283 | 1 | Hose Assembly, Thrust Bearing Lube, HT-400™ Power End |
| 100025591 | 70.26634 | 1 | Adapter, Hose, 070102-4-2C, 7-16-20 JIC Male x 1/8-27 NPT Male, Steel |
| 100016618 | 27.00101 | 1 | Coupling, 1/8 NOM 27V, Standard, Steel |
| 100025640 | 70.26763 | 2 | Adapter, Hose, Straight, 9/16-18 JIC Male x 3/8-18 NPT Male, Steel |
| 100031391 | 70.72665 | 1 | Adapter, Hose, Tee, 2 x 9/16-18 JIC Male x 9/16-18 JIC SWVL FML, STL |
| 100025641 | 70.26764 | 1 | Adapter, Hose, Straight, 7/16-20 JIC Male X 3/8-18 NPT Male, Steel |
| 100012853 | 70.26364 | 3 | Adapter, Hose, Elbow, 9/16-18 JIC Male x 9/16-JIC SWVL FML, STL |
| 100025596 | 70.26644 | 1 | Adapter, Hose, Straight, 9/16-18 JIC Male X 1/4-18 NPT Male, Steel |
| 100058310 | 316.16416 | 1 | Plug, Orifice, 1/8 NPT, 0.157 Dia Hole |
| 101284157 | 1 | Tube, Oil Line, General, HT-400™ Pump Power End,(Includes Rubber Lines and Fittings) | |
| 100011692 | 316.11917 | 3 | Bolt, Saddle, Crosshead Oiler |
| 100002324 | 70.72129 | 6 | Washer, Seal, 1/2-in. |
| 100011693 | 316.11918 | 6 | Saddle, Oil Line, Crosshead Oiler |
| 100000946 | 8.33929 | 6 | O-Ring, 90D, 1 1/16-in. x 7/8-in. x 3/32-in. |
| Crankshaft Lubricator Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100010084 | 106.53475 | 1 | Nut, 63121, Thread Protector, 7/8-in., S-W |
| 100057942 | 315.32351 | 1 | Gasket, Drive-Adapter Cap, Gallon Counter |
| 100028439 | 70.43786 | 4 | Screw, Hex Cap, 5/16-in. 18NC x 1-in., Pl |
| 100015040 | 70.58952 | 4 | Washer, Lock, 5/16-in., Stl, Pl |
| 100011695 | 316.13197 | 1 | Injector, Oil, Crankshaft, With l lb 20 Adapter |
| 100011700 | 316.16414 | 1 | Gasket, Injector, Crankshaft Oil, With No. 20 Adapter |
| 100001944 | 70.33947 | 1 | O-Ring, 90D, 9/16-in. x 3/8-in. x 3/32-in. |
| 100002816 | 316.13308 | 1 | Shaft, Drive, Gallon Counter |
| 100028033 | 70.42144 | 1 | Ring, Retaining, 5000, 156-H, Int, Truarc |
| 100013005 | 70.42128 | 1 | Ring, Retaining, UR-165-S, Stnls, Spirolox (Used on pre-1981 pumps) |
| 100013035 | 70.45847 | 1 | Seal, Magnetic Shaft, MSC-65152, Rev B |
| 100002821 | 316.14142 | 1 | Bushing, Magnetic Seal, Insulator & Counter Drive |
| Case Cover Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100028435 | 70.43781 | 97 | Screw-Hex Cap, 5/16-in. 18NC x 1/2-in., Pl |
| 100013115 | 70.76708 | 67 | Washer, Seal, 5/16-in., Barwood |
| 100058273 | 316.13321 | 1 | Cover, Long, Crosshead Slide |
| 100011698 | 316.13323 | 1 | Gasket, Long Cover, Crosshead Slide |
| 100058237 | 316.13210 | 1 | Plate, Cover, Oil Injector |
| 100009528 | 316.13301 | 1 | Gasket, Oil Injector, Cover Plate |
| 100009677 | 70.58981 | 16 | Washer, Lock, 5/16-in., Internal, Shakeproof, Pl |
| 100029873 | 70.58805 | 12 | Washer, Flat, 5/16-in., Wi, Pl |
| 100058086 | 316.11344 | 2 | Cover, Connecting Rod Access |
| 100011682 | 316.11345 | 3 | Gasket, Connecting Rod Access Cover |
| 100011696 | 316.13244 | 1 | Cover Assembly, Con Rod Access, W/4 1/4-in. OD Filler Neck |
| 100002844 | 70.12486 | 1 | Cap, Filler, Wisco, Vented |
| 100002815 | 316.13249 | 1 | Dipstick, Oil, 4 1/4-in. OD Filler Neck |
| 100058070 | 316.11143 | 1 | Cover, Inspection, Gear |
| 100011680 | 316.11144 | 1 | Gasket, Cover, Inspection Gear |
| 100058084 | 316.11311 | 1 | Cover, Plate, Gear Housing |
| 100002810 | 316.11313 | 1 | Gasket, Cover Plate, Gear |
| 100058085 | 316.11315 | 1 | Baffle, Inside, Gear Housing |
| 100058271 | 316.13317 | 1 | Cover, Short Crosshead Slide |
| 100011697 | 316.13319 | 1 | Gasket, Short Cover, Crosshead Slide |
| 100058208 | 316.131 | 1 | Power-End Case, Machined, Right-Hand Drive |
| 100058299 | 316.161 | 1 | Power-End Case, Machined, Left-Hand Drive |
| L-2 Spacer Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002811 | 316.11621 | 12 | Nut, 1-14 NF, Internal Wrenching, 1.03 Thread Length |
| 100002833 | 316.21066 | 3 | Retainer, Push Rod, HT-400™, Two Piece Nose, L-Spacer |
| 100000959 | 8.34020 | 3 | O-Ring, 90 Duro, 1 7/8 x 1 5/8 x 1/8, 568-223 |
| 100002832 | 316.21065 | 3 | Push Rod, Two Piece, L-Spacer, HT-400™ |
| 100002971 | 316.25166 | 3 | Tie Rod, Push Rod, L-Spacer, HT-400™ |
| 100058516 | 316.25168 | 1 | Spacer, L-Frame, Machined, HT-400™ FE & PE |
| 100058513 | 316.25100 | 1 | Guard Assembly, HT-400™, L-2 Spacer |
| 100011067 | 106.63914 | 2 | Hinge, DR-35, Latch, Hood, Bassick |
| 100026633 | 70.33263 | 4 | Nut, Clip, 10-24, Steel With Bright Green Finish |
| 100028741 | 70.44540 | 4 | Screw, Round Head, Machine, No 10-24 NC x 3/8, PL |
| 100029918 | 70.58947 | 4 | Washer, Lock, #10 ST Plated |
| 100013017 | 70.43814 | 12 | Screw, Hex Cap, 3/8-16 NC x 1, PL, Spec 70.43917 |
| 100013059 | 70.58955 | 12 | Washer, Lock, 3/8, Steel, PL, Spec |
| 100002804 | 316.10012 | 3 | Retainer, Push Rod Seal Housing, L-2 Spacer, HT-400™ Pump |
| 100001903 | 70.33739 | 3 | O-Ring, 70 Duro, 5 11/16 x 5 1/2 x 3/32 568-161 |
| 100002805 | 316.10013 | 3 | Housing, Push Rod Seal, Floating, L-2 Spacer, HT-400™ |
| 100002806 | 316.10014 | 6 | Seal, Push Rod, L-Spacer, HT-400™ |
| 100002968 | 316.24923 | 12 | Stud, Attaching, Fluid End to Power End, L Spacer, HT-400™ Pump |
| L-4 Spacer Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002811 | 316.11621 | 12 | Nut, 1-14 NF, Internal Wrenching, 1.03 Thread Length |
| 100002833 | 316.21066 | 3 | Retainer, Push Rod, HT-400™, Two Piece Nose, L-Spacer |
| 100000959 | 8.34020 | 3 | O-Ring, 90 Duro, 1 7/8 x 1 5/8 x 1/8, 568-223 |
| 100002832 | 316.21065 | 3 | Push Rod, Two Piece, L-Spacer, HT-400™ |
| 100002971 | 316.25166 | 3 | Tie Rod, Push Rod, L-Spacer, HT-400™ |
| 100058500 | 316.24926 | 12 | Tube, Frame, L-4 Spacer |
| 100009593 | 316.25101 | 1 | Guard Assembly, HT-400™, L-4 Spacer |
| 100011068 | 106.63915 | 2 | Fastener, Bar, Hood, Bassick, DH-40 |
| 100026443 | 70.32708 | 4 | Nut, Elastic Stop, 10-32 NF |
| 100028197 | 70.43289 | 4 | Screw, Hex Socket, #10-32 NF x ½, SS |
| 100029949 | 70.59015 | 4 | Washer, Lock, #10 SS |
| 100058335 | 316.21253 | 2 | Mount, Latch, Guard, Aluminum Spacer, HT-400™ Pump |
| 100023243 | 70.15877 | 4 | Clamp, Hose, SAE #36, 1 7/16 – 2 3/4 |
| 100028439 | 70.43786 | 9 | SCREW, HEX CAP, 5/16-18 NC X 1, PL |
| 100015040 | 70.58952 | 9 | Washer, lock 5/16 , Steel Pl |
| 100002818 | 316.14070 | 3 | Retainer, Push Rod Seal Housing, L4 Spacer, HT-400™ |
| 100002025 | 70.34106 | 3 | O-Ring, 70 Duro, 4 15/16 X 4 3/4 X 3/32 568-158 |
| 100002819 | 316.14072 | 3 | Housing, Push Rod Seal, Floating, L4 Spacer, HT400 |
| 100002806 | 316.10014 | 6 | Seal, Push Rod, L-Spacer, HT-400™ |
| 100058501 | 316.24927 | 1 | Plate, PE, Steel, HT-400™, L-Spacer |
| 100002968 | 316.24923 | 12 | Stud, Attaching, Fluid End to Power End, L Spacer, HT-400™ Pump |
| HT-400 Pump Power-End Parts | |||
| 3-3/8- and 4.0-inch (No. 3) Suction Valve Subassemblies | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058419 | 316.22977 | 3 | Retainer, Stop and Spring, HT400, No. 3 Suction Valve, Mach. Cast |
| 100002972 | 316.25233 | 6 | Boot, Suction and Stop, HT-400™, No. 3, 4 and 5 Frac |
| 100002841 | 316.2125 | 3 | Spring, Lock, Suction Stop, No. 3, HT400 |
| 100002079 | 70.35717 | 6 | Pin, Cotter, 1/8 x 1 1/2 Inch, HT-400™ |
| 100002868 | 316.22005 | 6 | Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass |
| 100002867 | 316.22004 | 6 | Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 4 Frac |
| 100002837 | 316.2108 | 6 | Spring, Valve, HT400, No. 3, 3.38 and 4 Inch, 36 lb/in |
| 100002824 | 316.21007 | 6 | Valve, HT400, 3.38, 4.0 In, Frac |
| 101333083 | 316.21048 | 6 | Insert, Valve, HT400, No. 3 Frac, Urethane, Acid/Frac Service (Yellow) |
| 100002823 | 316.21006 | 6 | Insert, Valve, HT400, No. 3 Frac, Urethane, Standard Service (Brown) |
| 100002825 | 316.21008 | 6 | Seat Valve, HT400, No. 3 Frac, Tapered |
| 100000968 | 8.34037 | 6 | O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-240 |
| 100002838 | 316.21096 | 6 | Retainer, Guide Bushing, HT400, 3.38, 4.0 Inch, Tapered Seat Bore |
| 4-1/2-inch (No. 4) Suction Valve Subassemblies | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058432 | 316.23034 | 3 | Retainer, Stop and Spring, HT400, No. 4 Suction Valve, Mach. Cast |
| 100002972 | 316.25233 | 6 | Boot, Suction and Stop, HT-400™, No. 3, 4 and 5 Frac |
| 100007270 | 316.22252 | 3 | Spring, Lock, Suction Stop, No. 4, HT400 |
| 100002868 | 316.22005 | 6 | Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass |
| 100002867 | 316.22004 | 6 | Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 4 Frac |
| 100002936 | 316.2308 | 6 | Spring, Valve, HT400, No. 4, 4.5 Inch, 25 lb/in |
| 100002875 | 316.22048 | 6 | Valve, HT400, 4.5 inch, Frac |
| 101333104 | 316.22046 | 6 | Insert, Valve, HT400, No. 4 Frac, Urethane, Acid/Frac Service (Yellow) |
| 100002876 | 316.22049 | 6 | Insert, Valve, HT400, No. 4 Frac, Urethane, Standard Service (Brown) |
| 100002874 | 316.22047 | 6 | Seat Valve, HT400, No. 4 Frac, Tapered |
| 100000970 | 8.34041 | 6 | O-ring, 90 Duro, 4 1/2 x 4 1/4 x 1/8, 568-244 |
| 100002955 | 316.23953 | 6 | Retainer, Guide Bushing, HT400, No. 4, Tapered Seat Bore |
| 5.0- and 6.0-inch (No. 5) Suction Valve Subassemblies | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058542 | 316.25840 | 3 | Retainer, Stop and Spring, HT400, No. 5 Suction Valve, Mach. Cast |
| 100002972 | 316.25233 | 6 | Boot, Suction and Stop, HT-400™, No. 3, 4 and 5 Frac |
| 100002882 | 316.22253 | 3 | Spring, Lock, Suction Stop, No. 5, HT400 |
| 100002870 | 316.22007 | 6 | Liner, Two Piece Bushing, Valve Guide, HT400, No.5 Frac, Brass |
| 100002869 | 316.22006 | 6 | Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 5 Frac |
| 100058597 | 316.27259 | 6 | Spring, Valve, HT400, No. 5, Conical, Stainless, 50 lb/in |
| 100002960 | 316.24027 | 6 | Valve, HT400, No. 5, 5.0 and 6.0 inch, Frac |
| 101349952 | 316.24026 | 6 | Insert, Valve, HT400, No. 5 Frac, Urethane, Acid/Frac Service (Yellow) |
| 100002961 | 316.24037 | 6 | Insert, Valve, HT400, No. 5 Frac, Urethane, Standard Service (Brown) |
| 100002957 | 316.24024 | 6 | Seat Valve, HT400, No. 5 Frac, Tapered |
| 100000974 | 8.34045 | 6 | O-ring, 90 Duro, 5 3/16 x 5 x 3/32, 568-159 |
| 100002962 | 316.24043 | 6 | Retainer, Guide Bushing, HT400, No. 5, Tapered Seat Bore |
| 3-3/8-inch Fluid-End Discharge Valve Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100008186 | 316.2102 | 3 | Retainer, Cover, HT-400™, 3.38 in |
| 100002836 | 316.2107 | 3 | Cover, Discharge, Double Guided Valve, HT-400™, 3.38 in |
| 100002830 | 316.21052 | 3 | Gasket, Discharge Valve & Cylinder Head Cover, 3.38 in., HT-400™ |
| 100002829 | 316.21051 | 3 | Ring, Spacer, Discharge Valve & Cylinder Head Cover, 3.38 in., HT-400™ |
| 100002868 | 316.22005 | 6 | Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass |
| 100002867 | 316.22004 | 6 | Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 4 Frac |
| 100002837 | 316.2108 | 3 | Spring, Valve, HT400, No. 3, 3.38 and 4 Inch, 36 lb/in |
| 100002824 | 316.21007 | 3 | Valve, HT400, 3.38, 4.0 In, Frac |
| 101333083 | 316.21048 | 3 | Insert, Valve, HT400, No. 3 Frac, Urethane, Acid/Frac Service (Yellow) |
| 100002823 | 316.21006 | 3 | Insert, Valve, HT400, No. 3 Frac, Urethane, Standard Service (Brown) |
| 100002825 | 316.21008 | 3 | Seat Valve, HT400, No. 3 Frac, Tapered |
| 100000968 | 8.34037 | 3 | O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-240 |
| 100002838 | 316.21096 | 3 | Retainer, Guide Bushing, HT400, 3.38, 4.0 Inch, Tapered Seat Bore |
| 4-inch Fluid-End Discharge Valve Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100007820 | 316.2202 | 3 | Retainer, Cover, HT-400™, 4.0 in |
| 100002938 | 316.23091 | 3 | Cover, Discharge, Double Guided Valve, HT-400™, 4.0 and 4.5 in |
| 100002878 | 316.22052 | 3 | Gasket, Discharge Valve & Cylinder Head Cover, No. 4, HT-400™ |
| 100002877 | 316.22051 | 3 | Ring, Spacer, Discharge Valve & Cylinder Head Cover, No.4, HT-400™ |
| 100002868 | 316.22005 | 6 | Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass |
| 100002867 | 316.22004 | 6 | Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 4 Frac |
| 100002837 | 316.2108 | 3 | Spring, Valve, HT400, No. 3, 3.38 and 4 Inch, 36 lb/in |
| 100002824 | 316.21007 | 3 | Valve, HT400, 3.38, 4.0 In, Frac |
| 101333083 | 316.21048 | 3 | Insert, Valve, HT400, No. 3 Frac, Urethane, Acid/Frac Service (Yellow) |
| 100002823 | 316.21006 | 3 | Insert, Valve, HT400, No. 3 Frac, Urethane, Standard Service (Brown) |
| 100002825 | 316.21008 | 3 | Seat Valve, HT400, No. 3 Frac, Tapered |
| 100000968 | 8.34037 | 3 | O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-240 |
| 100002838 | 316.21096 | 3 | Retainer, Guide Bushing, HT400, 3.38, 4.0 Inch, Tapered Seat Bore |
| 4-1/2-inch Fluid-End Discharge Valve Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100007820 | 316.2202 | 3 | Retainer, Cover, HT-400™, 4.0 in |
| 100002938 | 316.23091 | 3 | Cover, Discharge, Double Guided Valve, HT-400™, 4.0 and 4.5 in |
| 100002878 | 316.22052 | 3 | Gasket, Discharge Valve & Cylinder Head Cover, No. 4, HT-400™ |
| 100002877 | 316.22051 | 3 | Ring, Spacer, Discharge Valve & Cylinder Head Cover, No.4, HT-400™ |
| 100002868 | 316.22005 | 6 | Liner, Two Piece Bushing, Valve Guide, HT400, No.4 Frac, Brass |
| 100002867 | 316.22004 | 6 | Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 4 Frac |
| 100002936 | 316.2308 | 3 | Spring, Valve, HT400, No. 4, 4.5 Inch, 25 lb/in |
| 100002875 | 316.22048 | 3 | Valve, HT400, 4.5 inch, Frac |
| 101333104 | 316.22046 | 3 | Insert, Valve, HT400, No. 4 Frac, Urethane, Acid/Frac Service (Yellow) |
| 100002876 | 316.22049 | 3 | Insert, Valve, HT400, No. 4 Frac, Urethane, Standard Service (Brown) |
| 100002874 | 316.22047 | 3 | Seat Valve, HT400, No. 4 Frac, Tapered |
| 100000970 | 8.34041 | 3 | O-ring, 90 Duro, 4 1/2 x 4 1/4 x 1/8, 568-244 |
| 100002955 | 316.23953 | 3 | Retainer, Guide Bushing, HT400, No. 4, Tapered Seat Bore |
| 5.0- and 6.0-inch Fluid-End Discharge Valve Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058508 | 316.2502 | 3 | Retainer, Cover, HT-400™, 5.75 in |
| 100058471 | 316.24044 | 3 | Cover, Discharge, Double Guided Valve, HT-400™, 5.0 and 6.0 in |
| 100011734 | 316.25052 | 3 | Gasket, Discharge Valve & Cylinder Head Cover, No. 5, HT-400™ |
| 100011733 | 316.25051 | 3 | Ring, Spacer, Cylinder Head Cover, No.5, HT-400™ |
| 100002870 | 316.22007 | 6 | Liner, Two Piece Bushing, Valve Guide, HT400, No.5 Frac, Brass |
| 100002869 | 316.22006 | 6 | Insert, Two Piece Bushing, Valve Guide, Special, HT-400™, No 5 Frac |
| 100058597 | 316.27259 | 3 | Spring, Valve, HT400, No. 5, Conical, Stainless, 50 lb/in |
| 100002960 | 316.24027 | 3 | Valve, HT400, No. 5, 5.0 and 6.0 inch, Frac |
| 101349952 | 316.24026 | 3 | Insert, Valve, HT400, No. 5 Frac, Urethane, Acid/Frac Service (Yellow) |
| 100002961 | 316.24037 | 3 | Insert, Valve, HT400, No. 5 Frac, Urethane, Standard Service (Brown) |
| 100002957 | 316.24024 | 3 | Seat Valve, HT400, No. 5 Frac, Tapered |
| 100000974 | 8.34045 | 3 | O-ring, 90 Duro, 5-in. x 4 3/4-in. x 1/8-in., 568-248 |
| 100002962 | 316.24043 | 3 | Retainer, Guide Bushing, HT400, No. 5, Tapered Seat Bore |
| 3 3/8-inch Fluid-End Plunger/Cylinder Head Cover Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100008186 | 316.2102 | 6 | Retainer, Cover, HT-400™, 3.38 in |
| 100011711 | 316.22606 | 3 | Retainer, Protective Cylinder Head Cover, 4.0 in |
| 100002836 | 316.2107 | 3 | Cover, Cylinder Head, HT-400™, 3.38 in |
| 100002902 | 316.22605 | 3 | Cover, Protective Cylinder Head, 4.0 in |
| 100002830 | 316.21052 | 6 | Gasket, 3 Discharge Valve & Cylinder Head Cover, 3 3/8 in |
| 100002829 | 316.21051 | 6 | Ring, Spacer, #3 Discharge Valve & Cylinder Head Cover, 3 3/8 |
| 100002843 | 316.2131 | 3 | Nose, Plunger, HT-400™, 3 3/8 in |
| 100002842 | 316.2130 | 3 | Seal, Plunger Nose Assembly, HT-400™, 3 3/8 in |
| 100009641 | 316.21026 | 3 | Plunger, 3 3/8 in., Hard Surface, L-Spacer, HT-400™ |
| 100002827 | 316.21028 | 3 | Tie Rod, Plunger, HT-400™, 3.38, 4.0, 4.5 in |
| 100002831 | 316.21059 | 3 | Adapter, Pushrod, HT-400™, 3 3/8 in, Two Piece Nose |
| 4-inch Fluid-End Plunger/Cylinder Head Cover Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100008186 | 316.2102 | 6 | Retainer, Cover, HT-400™, 3.38 in |
| 100011711 | 316.22606 | 3 | Retainer, Protective Cylinder Head Cover, 4.0 in |
| 100002836 | 316.2107 | 3 | Cover, Cylinder Head, HT-400™, 3.38 in |
| 100002902 | 316.22605 | 3 | Cover, Protective Cylinder Head, 4.0 in |
| 100002830 | 316.21052 | 6 | Gasket, 3 Discharge Valve & Cylinder Head Cover, 3 3/8 in |
| 100002829 | 316.21051 | 6 | Ring, Spacer, #3 Discharge Valve & Cylinder Head Cover, 3 3/8 |
| 100002885 | 316.2231 | 3 | Nose, Plunger, HT-400™, 4.0 in |
| 100002884 | 316.2230 | 3 | Seal, Plunger Nose Assembly, HT-400™, 4.0 in |
| 100002883 | 316.22294 | 3 | Plunger, 4.0 in., Hard Surface, L-Spacer, HT-400™ |
| 100002827 | 316.21028 | 3 | Tie Rod, Plunger, HT-400™, 3.38, 4.0, 4.5 in |
| 100011706 | 316.22302 | 3 | Adapter, Pushrod, HT-400™, 4.0 in, Two Piece Nose |
| 4 1/2-inch Fluid-End Plunger/Cylinder Head Cover Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100007820 | 316.2202 | 6 | Retainer, Cover, HT-400™, 4.5 in |
| 100007823 | 316.23639 | 3 | Retainer, Protective Cylinder Head Cover, 4.5 in |
| 100009530 | 316.2207 | 3 | Cover, Cylinder Head, HT-400™, 4.5 in, Bar Stock |
| 100002952 | 316.23638 | 3 | Cover, Protective Cylinder Head, 4.5 in |
| 100002878 | 316.22052 | 6 | Gasket, 4 Discharge Valve & Cylinder Head Cover, 4 1/2 |
| 100002877 | 316.22051 | 6 | Ring, Spacer, #4 Discharge Valve & Cylinder Head Cover, 4 1/2 |
| 100002941 | 316.2331 | 3 | Nose, Plunger, HT-400™, 4.5, 5.0, 6.0 in |
| 100002940 | 316.2330 | 3 | Seal, Plunger Nose Assembly, HT-400™, 4.5 |
| 100002937 | 316.23085 | 3 | Plunger, 4.5 In., Hard Surface, L-Spacer, HT-400™ |
| 100002827 | 316.21028 | 3 | Tie Rod, Plunger, HT-400™, 3.38, 4.0, 4.5 in |
| 100011721 | 316.23089 | 3 | Adapter, Pushrod, HT-400™, 4.5 in, Two Piece Nose |
| 5-inch Fluid-End Plunger/Cylinder Head Cover Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058508 | 316.2502 | 6 | Retainer, Cover, HT-400™, 5.75 in |
| 100058490 | 316.24615 | 3 | Retainer, Protective Cylinder Head Cover, 5 in |
| 100058475 | 316.2407 | 3 | Cover, Cylinder Head, HT-400™, 5.0 in |
| 100011728 | 316.24614 | 3 | Cover, Protective Cylinder Head, 5.0 in |
| 100011734 | 316.25052 | 6 | Gasket, 5 Discharge Valve & Cylinder Head Cover, 5 in |
| 100011733 | 316.25051 | 6 | Ring, Spacer, #5 Discharge Valve & Cylinder Head Cover, 5 in |
| 100002941 | 316.2331 | 3 | Nose, Plunger, HT-400™, 4.5, 5.0, 6.0 in |
| 100002940 | 316.2330 | 3 | Seal, Plunger Nose Assembly, HT-400™, 4.5 |
| 100011726 | 316.24296 | 3 | Plunger, 5.0 In., Hard Surface, L-Spacer, HT-400™ |
| 100002970 | 316.25165 | 3 | Tie Rod, Plunger, HT-400™, 6.0 in |
| 100011727 | 316.24336 | 3 | Adapter, Pushrod, HT-400™, 5.0 in, Two Piece Nose |
| 6-inch Fluid-End Plunger/Cylinder Head Cover Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058510 | 316.2506 | 6 | Retainer, Cover, HT-400™, 6.0 in |
| 100058618 | 316.27614 | 3 | Retainer, Protective Cylinder Head Cover, 6 in |
| 100008190 | 316.2507 | 3 | Cover, Cylinder Head, HT-400™, 6.0 in |
| 100058617 | 316.27613 | 3 | Cover, Protective Cylinder Head, 6.0 in |
| 100058512 | 316.25074 | 6 | Gasket, 6 Discharge Valve & Cylinder Head Cover, 6 in |
| 100058511 | 316.25073 | 6 | Ring, Spacer, #6 Discharge Valve & Cylinder Head Cover, 6 in |
| 100002941 | 316.2331 | 3 | Nose, Plunger, HT-400™, 4.5, 5.0, 6.0 in |
| 100002940 | 316.2330 | 3 | Seal, Plunger Nose Assembly, HT-400™, 4.5 |
| 100058514 | 316.25162 | 3 | Plunger, 6.0 In., Hard Surface, L-Spacer, HT-400™ |
| 100002970 | 316.25165 | 3 | Tie Rod, Plunger, HT-400™, 6.0 in |
| 100058517 | 316.25172 | 3 | Adapter, Pushrod, HT-400™, 6.0 in, Two Piece Nose |
| 3-3/8-inch Packing Nut | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002081 | 3 | Pin, Groove, ½-in x 1 ¼-in, Type 5 | |
| 100002846 | 3 | Sleeve, Wiper Gland, 3.375 Inch | |
| 100002845 | 3 | Nut, Packing Adjustment, 3.375 Inch | |
| 3-3/8-inch CDI Packing | |||
| SAP PN | Legacy No. | Qty | Description |
| 101377627 | 3 | Seal, Packing Lube, 3.375, WS-Seal, CDI | |
| 100002011 | 3 | O-Ring, 90 Duro, 4 3/8 x 4 1/8 X 1/8 568-243 | |
| 101377626 | 3 | Carrier, Seal, 3.375, CDI | |
| 101377624 | 3 | Adapter, Female, 3.375, PEEK, CDI | |
| 101377623 | 3 | Packing, 3.375, CDI, WSP1, PTFE | |
| 101377622 | 3 | Header Ring, 3.375, HNBR, CDI | |
| 101377620 | 3 | Spacer, 3.375, Fluid End, CDI | |
| 3-3/8-inch Acid Service Packing (8140) | |||
| SAP PN | Legacy No. | Qty | Description |
| 101408135 | 3 | Seal, Packing Lube, Z20, 3-3/8 x 3-7/8 x 9/16 Zurcon UCUP, Double Lip FE | |
| 100000969 | 3 | O-Ring, 90 Duro, 4 3/8 x 4 1/8 X 1/8 568-243 | |
| 101389194 | 3 | Carrier, Seal, 3.375, HT-400™, 2004 | |
| 100002852 | 3 | Ring, Backup, Packing, HT-400™ 3.38 in, 2004 | |
| 100002854 | 3 | Packing Set, 3 3/8 x 4 3/8 x 0.50 Stock HT, 3 rings, Hard, Acid Service | |
| 100058346 | 3 | Header Ring, 3 3/8 x 4 3/8 Packing, Polyurethane, HT-400™ FE | |
| 100002852 | 3 | Adapter, Header Ring, 3 3/8 x 4/3/8, HT-400™, FE | |
| 4.0-inch Packing Nut | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002081 | 3 | Pin, Groove, ½-in x 1 ¼-in, Type 5 | |
| 101328357 | 3 | Sleeve, Wiper Gland, HCLE, 4.0 Inch | |
| 101328001 | 3 | Nut, Packing Adjustment, HCLE, 4.0 Inch | |
| 4.0-inch CDI Packing | |||
| SAP PN | Legacy No. | Qty | Description |
| 101377657 | 3 | Seal, Packing Lube, 4.000, WS-Seal, CDI | |
| 100002016 | 3 | O-Ring, 90 Duro, 5 x 4 3/4 X 1/8 568-248 | |
| 101377656 | 3 | Carrier, Seal, 4.000, CDI | |
| 101377652 | 3 | Adapter, Female, 4.000, PEEK, CDI | |
| 101377641 | 3 | Packing, 4.000, CDI, WSP1, PTFE | |
| 101377640 | 3 | Header Ring, 4.000, HNBR, CDI | |
| 101377638 | 3 | Spacer, 4.000, Fluid End, CDI | |
| 4.0-inch Acid Service Packing (8140) | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058388 | 3 | Seal, Packing Lube, Z20, 4 x 4 1/2 x 9/16 Zurcon UCUP, Double Lip FE | |
| 100000974 | 3 | O-Ring, 90 Duro, 5 x 4 3/4 X 1/8 568-248 | |
| 101389213 | 3 | Carrier, Seal, 4.0, HT-400™, 2004 | |
| 101389224 | 3 | Ring, Backup, Packing, HT-400™ 4.0 in, 2004 | |
| 100002899 | 3 | Packing Set, 4 x 5 x 0.50 Stock HT, 3 rings, Hard, Acid Service | |
| 100002897 | 3 | Header Ring, 4 x 5 Packing, Polyurethane, HT-400™ FE | |
| 100002896 | 3 | Adapter, Header Ring, 4 x 5, HT-400™, FE | |
| 4.5-inch Packing Nut | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002081 | 3 | Pin, Groove, ½-in x 1 ¼-in, Type 5 | |
| 101328357 | 3 | Sleeve, Wiper Gland, HCLE, 4.0 Inch | |
| 101330209 | 3 | Nut, Packing Adjustment, HCLE, 4.5 Inch | |
| 4.5-inch CDI Packing | |||
| SAP PN | Legacy No. | Qty | Description |
| 101377665 | 3 | Seal, Packing Lube, 4.50, WS-Seal, CDI | |
| 100002019 | 3 | O-Ring, 90 Duro, 5 1/2 x 5 1/4 x 1/8 568-252 | |
| 101377664 | 3 | Carrier, Seal, 4.50, CDI | |
| 101377663 | 3 | Adapter, Female, 4.500, PEEK, CDI | |
| 101377661 | 3 | Packing, 4.50, CDI WSP1, PTFE | |
| 101377660 | 3 | Header Ring, 4.50, HNBR, CDI | |
| 101377659 | 3 | Spacer, 4.50 in., Fluid End, CDI | |
| 4.5-inch Acid Service Packing (8140) | |||
| SAP PN | Legacy No. | Qty | Description |
| 101252286 | 3 | Seal, Packing Lube, Z20, 4 1/2 x 5 x 9/16 Zurcon UCUP, Double Lip FE | |
| 100000977 | 3 | O-Ring, 90 Duro, 5 1/2 x 5 1/4 X 1/8 568-252 | |
| 101389214 | 3 | Carrier, Seal, 4.5, HT-400™, 2004 | |
| 101389225 | 3 | Ring, Backup, Packing, HT-400™ 4.5 in, 2004 | |
| 100002951 | 3 | Packing Set, 4 1/2x 5 1/2 x 0.50 Stock HT, 3 rings, Hard, Acid Service | |
| 100002949 | 3 | Header Ring, 4 1/2 x 5 1/2 Packing, Polyurethane, HT-400™ FE | |
| 100002948 | 3 | Adapter, Header Ring, 4 1/2 x 5 1/2, HT-400™, FE | |
| 5.0-inch Packing Nut | |||
| SAP PN | Legacy No. | Qty | Description |
| 100027239 | 3 | Pin, Groove, 3/8-in x 1 ¼-in, Type 5 | |
| 101438001 | 3 | Sleeve, Wiper Gland, HCLE, 5.0 Inch | |
| 101438000 | 3 | Nut, Packing Adjustment, HCLE, 5.0 Inch | |
| 5.0-inch CDI Packing | |||
| SAP PN | Legacy No. | Qty | Description |
| 101377674 | 3 | Seal, Packing Lube, 5.0, WS-Seal, CDI | |
| 101377672 | 3 | O-Ring, 90 Duro, 6 x 5 3/4 x 1/8, 568-256 | |
| 100002022 | 3 | Carrier, Seal, 5.0, CDI | |
| 101377671 | 3 | Adapter, Female, 5.00, PEEK, CDI | |
| 101377669 | 3 | Packing, 5.0, CDI WSP1, PTFE | |
| 101377668 | 3 | Header Ring, 5.0, HNBR, CDI | |
| 101377667 | 3 | Spacer, 5.0 in., Fluid End, CDI | |
| 5.0-inch Acid Service Packing (8140) | |||
| SAP PN | Legacy No. | Qty | Description |
| 101408161 | 3 | Seal, Packing Lube, Z20, 5 x 5 1/2 x 9/16 Zurcon UCUP, Double Lip FE | |
| 100000980 | 3 | O-Ring, 90 Duro, 6 x 5 3/4 X 1/8 568-256 | |
| 101389216 | 3 | Carrier, Seal, 5.0, HT-400™, 2004 | |
| 101389226 | 3 | Ring, Backup, Packing, HT-400™ 5.0 in, 2004 | |
| 100002967 | 3 | Packing Set, 5 x 6 x 0.50 Stock HT, 3 rings, Hard, Acid Service | |
| 100058486 | 3 | Header Ring, 5 x 6 Packing, Polyurethane, HT-400™ FE | |
| 100002966 | 3 | Adapter, Header Ring, 5 x 6, HT-400™, FE | |
| 6.0-inch Packing Nut | |||
| SAP PN | Legacy No. | Qty | Description |
| 100027239 | 3 | Pin, Groove, 3/8-in x 1 ¼-in, Type 5 | |
| 101330379 | 3 | Sleeve, Wiper Gland, HCLE, 6.0 Inch | |
| 101330259 | 3 | Nut, Packing Adjustment, HCLE, 6.0 Inch | |
| 6.0-inch CDI Packing | |||
| SAP PN | Legacy No. | Qty | Description |
| 101377686 | 3 | Seal, Packing Lube, 6.0, WS-Seal, CDI | |
| 100007763 | 3 | O-Ring, 90 Duro, 7 x 6 3/4 x 1/8, 568-261 | |
| 101377685 | 3 | Carrier, Seal, 6.0, CDI | |
| 101377684 | 3 | Adapter, Female, 6.00, PEEK, CDI | |
| 101377683 | 3 | Packing, 6.0, CDI WSP1, PTFE | |
| 101377682 | 3 | Header Ring, 6.0, HNBR, CDI | |
| 101377679 | 3 | Spacer, 6.0 in., Fluid End, CDI | |
| 6.0-inch Acid Service Packing (8140) | |||
| SAP PN | Legacy No. | Qty | Description |
| 101408181 | 3 | Seal, Packing Lube, Z20, 6 x 6 1/2 x 9/16 Zurcon UCUP, Double Lip FE | |
| 100013726 | 3 | O-Ring, 90 Duro, 7 x 6 3/4 X 1/8 568-261 | |
| 101389217 | 3 | Carrier, Seal, 6.0, HT-400™, 2004 | |
| 101389227 | 3 | Ring, Backup, Packing, HT-400™ 6.0 in, 2004 | |
| 100002997 | 3 | Packing Set, 6 x 7 x 0.50 Stock HT, 3 rings, Hard, Acid Service | |
| 100058613 | 3 | Header Ring, 6 x 7 Packing, Polyurethane, HT-400™ FE | |
| 100002996 | 3 | Adapter, Header Ring, 6 x 7, HT-400™, FE | |
| 3 3/8-inch Fluid-End Straight Discharge Flange | |||
| SAP PN | Legacy No. | Qty | Description |
| 100058317 | 316.21013 | 1 | Flange, Discharge, HT-400™ Pump, 3-3/8 Inch, 20,000 PSI, Straight |
| 100002801 | 315.27117 | 1 | Seal, Discharge Passage, 2.5 OD |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002798 | 315.11183 | 2 | Washer, Flat, Worm Housing, Head, 1 In |
| 100002926 | 316.23013 | 2 | Stud, HT-400™, Fluid End To Thick Discharge Flange |
| 4.0-inch Fluid-End Straight Discharge Flange | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002992 | 316.27482 | 1 | Flange, Discharge, HT-400™ Pump, 4.0 – 6.0 Inch, Straight |
| 100002975 | 316.2547 | 1 | Seal, Discharge Passage, HT-400™, 3.375 O.D. |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002798 | 315.11183 | 2 | Washer, Flat, Worm Housing, Head, 1 In |
| 4 1/2-, 5.0-, and 6.0-inch Fluid-End Straight Discharge Flange | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002992 | 316.27482 | 1 | Flange, Discharge, HT-400™ Pump, 4.0 – 6.0 Inch, Straight |
| 100002975 | 316.2547 | 1 | Seal, Discharge Passage, HT-400™, 3.375 O.D. |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002926 | 316.23013 | 2 | Stud, HT-400™, Fluid End To Thick Discharge Flange |
| 3 3/8-inch Fluid-End Curved Discharge Flange | |||
| SAP PN | Legacy No. | Qty | Description |
| 100009881 | 316.21676 | 1 | Flange, Discharge, HT-400™, 3-3/8 Inch, 20,000 PSI, Curved, RH |
| 100009882 | 316.21677 | 1 | Flange, Discharge, HT-400™, 3-3/8 Inch, 20,000 PSI, Curved, LH |
| 100002801 | 315.27117 | 1 | Seal, Discharge Passage, 2.5 OD |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002798 | 315.11183 | 2 | Washer, Flat, Worm Housing, Head, 1 In |
| 100002926 | 316.23013 | 2 | Stud, HT-400™, Fluid End To Thick Discharge Flange |
| 4.0-inch Fluid-End Curved Discharge Flange | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002930 | 316.23019 | 1 | Flange, Discharge, HT-400™, 4.0 – 6.0 Inch, Curved Right-Hand |
| 100002929 | 316.23017 | 1 | Flange, Discharge, HT-400™, 4.0 – 6.0 Inch, Curved Left-Hand |
| 100002975 | 316.2547 | 1 | Seal, Discharge Passage, HT-400™, 3.375 O.D. |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002798 | 315.11183 | 2 | Washer, Flat, Worm Housing, Head, 1 In |
| 4 1/2-, 5.0-, and 6.0-inch Fluid-End Curved Discharge Flange | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002930 | 316.23019 | 1 | Flange, Discharge, HT-400™, 4.0 – 6.0 Inch, Curved Right-Hand |
| 100002929 | 316.23017 | 1 | Flange, Discharge, HT-400™, 4.0 – 6.0 Inch, Curved Left-Hand |
| 100002975 | 316.2547 | 1 | Seal, Discharge Passage, HT-400™, 3.375 O.D. |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002926 | 316.23013 | 2 | Stud, HT-400™, Fluid End To Thick Discharge Flange |
| 3 3/8-inch Fluid-End Blank Discharge Flange (Thin) | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002858 | 316.21673 | 1 | Flange, Discharge, HT-400™, 3.38 In., Blank, Thin |
| 100002801 | 315.27117 | 1 | Seal, Discharge Passage, 2.5 OD |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 Total Length |
| 100002798 | 315.11183 | 2 | Washer, Flat, Worm Housing, Head, 1 In. |
| 100009362 | 316.23012 | 2 | Stud, HT-400™, Fluid End To Thin Discharge Flange |
| 3 3/8-inch Fluid-End Blank Discharge Flange (Thick) | |||
| SAP PN | Legacy No. | Qty | Description |
| 101325320 | 1 | Flange, Discharge, HT-400™, 3.38 In., Blank, Thick | |
| 100002801 | 315.27117 | 1 | Seal, Discharge Passage, 2.5 OD |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002798 | 315.11183 | 2 | Washer, Flat, Worm Housing, Head, 1 In. |
| 100002926 | 316.23013 | 2 | Stud, HT-400™, Fluid End To Thick Discharge Flange |
| 4.0-inch Fluid-End Blank Discharge Flange | |||
| SAP PN | Legacy No. | Qty | Description |
| 100007821 | 316.22980 | 1 | Flange, Discharge, HT-400™, 4.0, 4.5, 5.0, 6.0 Inch , Blank, Thick |
| 100002975 | 316.2547 | 1 | Seal, Discharge Passage, HT-400™, 3.375 O.D. |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002798 | 315.11183 | 2 | Washer, Flat, Worm Housing, Head, 1 In. |
| 4 1/2-, 5.0-, and 6.0-inch Fluid-End Blank Discharge Flange | |||
| SAP PN | Legacy No. | Qty | Description |
| 100007821 | 316.22980 | 1 | Flange, Discharge, HT-400™, 4.0, 4.5, 5.0, 6.0 Inch ,Blank, Thick |
| 100002975 | 316.2547 | 1 | Seal, Discharge Passage, HT-400™, 3.375 O.D. |
| 100002811 | 316.11621 | 2 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002926 | 316.23013 | 2 | Stud, HT-400™, Fluid End To Thick Discharge Flange |
| 3 3/8-inch Fluid End | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002850 | 316.2145 | 2 | Spacer, Inner, Discharge Passage Seal, HT-400™, 3.375 in FE |
| 100002801 | 315.27117 | 6 | Seal, Discharge Passage, HT-400™, 2.5 in. O.D. |
| 100002993 | 316.27488 | 1 | Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT-400™, TC |
| 100002976 | 316.25501 | 2 | Nut, Top Tie Bolt, HT-400™, TC |
| 100002894 | 316.22493 | 2 | Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt |
| 100002811 | 316.11621 | 4 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002798 | 315.11183 | 4 | Washer, Flat, Worm Housing, Head, 1 In. |
| 100007819 | 316.21981 | 3 | Sleeve, Packing, HT400, 3.38 In. |
| 100007621 | 8.34038 | 3 | O-Ring, 90 Duro, 4 1/8 X 3 7/8 X 1/8, 568-241 |
| 100002866 | 316.21951 | 3 | Fluid End Section, HT-400™ Pump, 3.38 Inch, Not Sleeved |
| 101455172 | 3 | Fluid End Section, HT-400™ Pump, 3.38 Inch, With Packing Sleeve | |
| 100058621 | 316.27927 | 1 | Tag, Part Number, Fluid End, HT-400™ |
| 100001860 | 70.32760 | 2 | Nut, Elastic, Stop, 3/4-in., 16NF |
| 100002925 | 316.23011 | 1 | Bolt, Bottom, Tie, HT400, Type Certified |
| 4.0-inch Fluid End | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002974 | 316.2545 | 2 | Spacer, Inner, Discharge Passage Seal, HT-400™, 5.75 in. |
| 100002975 | 316.2547 | 6 | Seal, Discharge Passage, HT-400™, 3.375 in. O.D. |
| 100002993 | 316.27488 | 1 | Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT-400™, TC |
| 100002994 | 316.27489 | 2 | Bolt, Tie, Fluid End, HT-400™, 1 in. Dia, Three Top Tie Bolt FE, TC |
| 100002976 | 316.25501 | 2 | Nut, Top Tie Bolt, HT-400™, TC |
| 100002894 | 316.22493 | 2 | Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt |
| 100002811 | 316.11621 | 4 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002798 | 315.11183 | 4 | Washer, Flat, Worm Housing, Head, 1 In. |
| 100002914 | 316.22981 | 3 | Sleeve, Packing, HT400, 4.0 In. |
| 100000972 | 8.34043 | 3 | O-Ring, 90 Duro, 4 3/4 X 4 1/2 X 1/8, 568-246 |
| 100002915 | 316.22982 | 3 | Fluid End Section, HT-400™ Pump, 4.00 Inch, Not Sleeved |
| 101455173 | 3 | Fluid End Section, HT-400™ Pump, 4.00 Inch, With Packing Sleeve | |
| 100058621 | 316.27927 | 1 | Tag, Part Number, Fluid End, HT-400™ |
| 4 1/2-inch Fluid End | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002974 | 316.2545 | 2 | Spacer, Inner, Discharge Passage Seal, HT-400™, 5.75 in. |
| 100002975 | 316.2547 | 6 | Seal, Discharge Passage, HT-400™, 3.375 in. O.D. |
| 100002993 | 316.27488 | 1 | Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT-400™, TC |
| 100002976 | 316.25501 | 2 | Nut, Top Tie Bolt, HT-400™, TC |
| 100002894 | 316.22493 | 2 | Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt |
| 100002811 | 316.11621 | 4 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002956 | 316.23981 | 3 | Sleeve, Packing, HT400, 4.5 In. |
| 100000975 | 8.34047 | 3 | O-Ring, 90 Duro, 5 1/4 X 5 X 1/8, 568-250 |
| 100002954 | 316.23951 | 3 | Fluid End Section, HT-400™ Pump, 4.5 Inch, Not Sleeved |
| 101455174 | 3 | Fluid End Section, HT-400™ Pump, 4.5 Inch, With Packing Sleeve | |
| 100058621 | 316.27927 | 1 | Tag, Part Number, Fluid End, HT-400™ |
| 100001860 | 70.32760 | 2 | Nut, Elastic, Stop, 3/4-in., 16NF |
| 100002925 | 316.23011 | 1 | Bolt, Bottom, Tie, HT400, Type Certified |
| 5.0-inch Fluid End | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002974 | 316.2545 | 2 | Spacer, Inner, Discharge Passage Seal, HT-400™, 5.75 in. |
| 100002975 | 316.2547 | 6 | Seal, Discharge Passage, HT-400™, 3.375 in. O.D. |
| 100002993 | 316.27488 | 1 | Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT-400™, TC |
| 100002976 | 316.25501 | 2 | Nut, Top Tie Bolt, HT-400™, TC |
| 100002894 | 316.22493 | 2 | Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt |
| 100002811 | 316.11621 | 4 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002969 | 316.24981 | 3 | Sleeve, Packing, HT400, 5.0 In. |
| 100000979 | 8.34051 | 3 | O-Ring, 90 Duro, 5 3/4 X 5 1/2 X 1/8, 568-254 |
| 100058502 | 316.24951 | 3 | Fluid End Section, HT-400™ Pump, 5.0 Inch, Not Sleeved |
| 101455175 | 3 | Fluid End Section, HT-400™ Pump, 5.0 Inch, With Packing Sleeve | |
| 100058621 | 316.27927 | 1 | Tag, Part Number, Fluid End, HT-400™ |
| 100001860 | 70.32760 | 2 | Nut, Elastic, Stop, 3/4-in., 16NF |
| 100002925 | 316.23011 | 1 | Bolt, Bottom, Tie, HT400, Type Certified |
| 6.0-inch Fluid End | |||
| SAP PN | Legacy No. | Qty | Description |
| 100002974 | 316.2545 | 2 | Spacer, Inner, Discharge Passage Seal, HT-400™, 5.75 in. |
| 100002975 | 316.2547 | 6 | Seal, Discharge Passage, HT-400™, 3.375 in. O.D. |
| 100002993 | 316.27488 | 1 | Bolt, Tie, 1.375-12 UNF x 32.4 in., Top, Fluid End, HT-400™, TC |
| 100002976 | 316.25501 | 2 | Nut, Top Tie Bolt, HT-400™, TC |
| 100002894 | 316.22493 | 2 | Washer, Hardened, 2.31 O.D. x 1.43 I.D., For Top Tie Bolt |
| 100002811 | 316.11621 | 4 | Nut, 1-14 NF, Internal Wrenching, 1.03 TL |
| 100002998 | 316.27981 | 3 | Sleeve, Packing, HT400, 6.0 In. |
| 100000983 | 8.34057 | 3 | O-Ring, 90 Duro, 6 3/4 X 6 1/2 X 1/8, 568-260 |
| 100058622 | 316.27951 | 3 | Fluid End Section, HT-400™ Pump, 6.0 Inch, Not Sleeved |
| 101455176 | 3 | Fluid End Section, HT-400™ Pump, 6.0 Inch, With Packing Sleeve | |
| 100058621 | 316.27927 | 1 | Tag, Part Number, Fluid End, HT-400™ |
| 100001860 | 70.32760 | 2 | Nut, Elastic, Stop, 3/4-in., 16NF |
| 100002925 | 316.23011 | 1 | Bolt, Bottom, Tie, HT400, Type Certified |
| Plunger Lube Pump Subassembly | |||
| SAP PN | Legacy No. | Qty | Description |
| 100029874 | 70.58806 | 8 | Washer, Flat, 3/8-in. WI, Pl |
| 13431 | 70.43839 | 8 | Screw, Hex Socket, 3/8-in. 16NC x 1 1/4-in., Unbrako/Loc-Wel |
| 100003003 | 317.54010 | 1 | Pump, Gear, Recirculating Plunger Lubrication, HT-400™ Pump |
| 100058711 | 317.51020 | 1 | Adapter, Pump To Thrust Plate, Plunger Lube, HQ |
| 100011749 | 317.51065 | 1 | Adapter, HQ, Lube Pump, Plunger Lube |
| 100028805 | 70.44781 | 1 | 1/4-in. x 1/4-in. 20NC Set Screw |
| 100011751 | 317.51067 | 1 | Seal, Lip, 1.000 Id X 2.000 Od X 0.250 Width |
| 100011750 | 317.51066 | 1 | Bearing, Ball, Radial, 1.0 Id X 2.0 Od X 0.375 Thick, Open |
| 100011748 | 317.51064 | 1 | Adapter, HQ, Worm Shaft, Plunger Lube |
| Recirculating Plunger Lube Pump Plumbing | |||
| SAP PN | Legacy No. | Qty | Description |
| 100025600 | 1 | Adapter, Hose, Straight, 1 1/16-12 JIC Male x 1/2-14 MPT, Stl | |
| 100035164 | 1 | Adapter, Hose, Cross, 1/2-14 MPT x 1/2 -14 FPT x 12 -14 FPT, Aeroquip | |
| 100016860 | 2 | Nipple, Standard, 1/2 X AT, Blackwall, A120 | |
| 101139835 | 1 | Pipe Plug – 1/2 NPT, Sq Head, Steel | |
| 100033152 | 1 | Adapter, Hose, Cross, Tee, 1/2-14 FPT | |
| 100001210 | 1 | Bushing, Hexagon, 1/2 x 1/4, Steel | |
| 100025044 | 1 | Gauge, Pressure, 0-60 psi, 2 1/2 in., 1/4 NPT | |
| 100025646 | 1 | Adapter, Hose, Elbow, 9/16-18 JIC Male x 1/2-14 MPT, Steel | |
| 100033606 | 2 | Fitting, Hose, Straight, 3/8 NOM Hose x 9/16 JIC Swivel Female, Brass | |
| 100016518 | 1 | Bushing, Hexagon, 3/4 x 1/2, Steel | |
| 100015300 | 1 | Valve, Relief, Brown and Sharp, 3/4, Preset at 45# | |
| 100031214 | 1 | Adapter, Hose, Straight, 1 1/16-12 JIC Female x 9/16-18 JIC Male | |
| 100031598 | 1 | Adptr, Hose, Tee, 1 1/16-12 JIC M x 3/4-14 MPT x 1 1/16-12 JIC M, Stl | |
| 100035892 | 2 | Fitting, Hose, Straight, 1 1/16-12 JIC Swivel Female x 3/4 NOM Hose, Brs | |
| Recirculating Plunger Lube Fluid-End Manifold Plumbing | |||
| SAP PN | Legacy No. | Qty | Description |
| 100025596 | 1 | Adapter, Hose, Straight, 9/16-18 JIC Male x 1/4-18 NPT Male, Steel | |
| 100000596 | 1 | Valve, Ball, 1/4, 600 PSI, FPT, Bronze Body, 316 Ball & Stem, Tefl Seats & Seals | |
| 100033761 | 1 | Adapter, Hose, 90 Degree 1/4-18 MPT x 1/4-18 MPT, Aero | |
| 101376366 | 2 | Assembly, Manifold, Plunger, Lubrication, FE, Triplex, WSP | |
| 100032911 | 2 | Tag, Identification, Hydraulic Tubing, Stnls Stl, 0.31 Wide x 14.3 | |
| 100025591 | 6 | Adapter, Hose, Straight, 7/16-20 JIC Male x 1/8-27 MPT, Steel | |
| 101374860 | 3 | Line, Upper, Oil, Plunger Lubricator, WSP | |
| 100002681 | 1 | Valve, Safety, 1/4, Brass, 150 psi Pressure Relief Setting | |
| 100027497 | 1 | Plug, Pipe, 1/4 18 NPTF, Steel Countersunk Hex, Headless | |
| 101374914 | 3 | Line, Lower, Oil, Plunger Lubricator, WSP | |
| 100000592 | 3 | Valve, Check, 1/8, Female Inlet, Male Outlet, With 70 Duro O-Ring | |
| 100025604 | 6 | Adapter, Hose, Elbow, 7/16-20 JIC Male x 1/8-27 MPT, Steel | |
| 100028293 | 2 | Screw, Hex Socket, 3/4-10 NC x 1 1/4 | |
| 100029925 | 2 | Washer, Lock, 3/4, Steel, PL | |
| 101391751 | 2 | Bracket, Plunger Lubrication Manifold, WSP | |
| 100015025 | 1 | Adapter, Hose, Elbow, 9/16-18 JIC Male x 1/4-18 MPT, Steel | |
Contact:Mr Liu
Mobile:15869109368
Tel:86-571-89967020
E-mail:info@dawopu.com
Address:No151 ,ZiDingXiang Rd, Hangzhou. Zhejiang Province, China