PC600 plunger pump is a type of reciprocating pump with a fixed high-pressure seal and a smooth cylindrical plunger that slides over the seal. These two features of the plunge pump make it different from the piston pump. It can produce high pressure than a piston pump. Therefore, it may use for high-pressure applications.
Piston and plunger pumps use a chamber that expands and constricts to suck and pressurize the fluid. Because these are reciprocating pumps, the chamber expands and constricts due to the reciprocating motion of the plunger (upward and downward; back and forth) instead of a circular (rotating) movement.
QWS 2500 Fluid end
TPC600 plunger pump is also known as high viscosity pump, high-pressure pump or high-pressure pump because they provide a high pumping pressure. These pumps can also pump both solid and viscous media. These reciprocating pumps use for pumping industrial and municipal wastewater.
Item No. | Name of the Customer’s inventory items | Customer ERP Code |
1 | Bolt 1/2-13UNCx2.25 half rod clamp TPC600 | AD-000000154736 |
2 | Cardan shaft X04-00-534 pump drive TPC600 | 00-000000108503 |
3 | Shaft-gear P60-14-020 pump gearbox TPC600 | AD-000000153847 |
4 | Screw 1/4-20UNCx0.5 X20-07-513 for fastening the crosshead washer TPC600 | AD-000000154734 |
5 | Connecting rod bearing assembly 5.25″IDX5.595″ODX4″W P60-13-031 (L6399100108 C19) TPC600 | 00-000000065213 |
6 | Bushing P60-14-019 pump reducer TPC600 | AD-000000153845 |
7 | P06-00-058 Plunger Packing Nut 4 1/2″ TPC600 | 00-000000116501 |
8 | Plunger Packing Nut P06-00-065 4″ TPC600 | 00-000000116502 |
9 | Diaphragm PD20D7.5M02 pneumatic compensator KV-75H 3NB-1600HL | 00-000000117085 |
10 | Diaphragm of pneumatic compensator GH3161-27.03.00 KV-75 F1000/F1300 | 00-000000013783 |
11 | Diaphragm of pneumatic compensator KQ40-L/52 material NBR TPC600 | 00-000000117091 |
12 | Diaphragm of pneumatic compensator KV-45 F500 | 00-000000013785 |
13 | Wear-resistant disc RS11309.05.014/GH3161-05.15 F1300 | 00-000000013831 |
14 | Cylinder cover bottom RS11311.05.04 F500 | 00-000000013978 |
15 | JZR3-L8 shut-off valve assembly (tee, pressure gauge, valve) | 00-000000118822 |
16 | JZR3-L8 shut-off valve assembly (tee, pressure gauge, valve) | 00-000000118822 |
17 | Crankshaft with lubrication channels P60-12-014 TPC600 | AD-000000150979 |
18 | Gear wheel P60-14-005 pump reducer TPC600 | AD-000000153848 |
19 | Collector discharge RS11309.05.009/GH3161-05.09 F1300 | 00-000000016641 |
20 | D-ring sealing 4 1/2″ IMZ-45.050.19-01 large TPC600 | 00-000000120232 |
21 | D-ring sealing 4″ large TPC600 | 00-000000120231 |
22 | Steel ring gasket R44 discharge line F1300/F1000 | 00-000000017374 |
23 | Sealing ring 190×3.55 O-shaped half-rod GB3452.1 F1300 | 00-000000017153 |
24 | Sealing ring Ø125×7 GB3452/1-82 for half-rod F1300 | 00-000000017301 |
25 | Pulsation compensator KV-75 GH3161-27.00 (G) F1300 | 00-000000017603 |
26 | Repair kit X05-91-509 2″x103.5MPa safety valve TPC600 | 00-000000120401 |
27 | Hydraulic box GH3101-05.01.00 with components and fasteners F1000 | 00-000000018058 |
28 | Hydraulic box HTNB161.01.00 receiving 3NB-1600HL | 00-000000120789 |
29 | Hydraulic box HTNB161.03.00 outlet 3NB-1600HL | 00-000000120790 |
30 | Hydraulic box RS11309.05.00 F1300 Hong Hua | 00-000000018061 |
31 | Hydraulic box RS11311.05.01.01 F500 | 00-000000018062 |
32 | Crosshead RS11309.04.001 F1300 | 00-000000018415 |
33 | Crosspiece GH3161-22.03.00A outlet F1000 | 00-000000121240 |
34 | Cube of pressure manifolds RS11309.16.00 assembled with fasteners (five-way) F1300 | 00-000000018817 |
35 | Cube of pressure manifolds RS11309.16.00 assembled with fasteners (five-way) F1300 | 00-000000018817 |
36 | Pressure manifold cube RS11311.10.01.00 F500 | 00-000000018816 |
37 | Valve Stem Guide (Lower) GH3101-05.27.00 F1000 | 00-000000020615 |
38 | Runner guide RS11309.04.002 upper F1300 | 00-000000020634 |
39 | Runner guide RS11309.04.013 lower F1300 | 00-000000020636 |
40 | Gasket package NB100.02.17.00 3NB-1600F | 00-000000147249 |
41 | Crosshead pin RS11309.04.011 F1300 | 00-000000021366 |
42 | Upper slider GH3101-04.02 F1000 | 00-000000004778 |
43 | Half rod 3.5″ P62-16-019 connecting rod for TPC600 pump | 00-000000109530 |
44 | Pump half rod RS11311.04.06 F500 | 00-000000004831 |
45 | Piston GH3101-28.03.00 valve JA-3 assembly | 00-000000109550 |
46 | Piston GH3101-28.03.00 valve JA-3 assembly | 00-000000109550 |
47 | Pump reducer P62-16-051 TPC600 | AD-000000153711 |
48 | Seal 3 1/2″ P60-34-848 Half Rod Assy TPC600 | 00-000000111456 |
49 | Seal 4 1/2″ IMZ-07.330.08-01 crown nut TPC600 | 00-000000111442 |
50 | Seal 4″ IMZ-07.229.06 crown nut TPC600 | 00-000000111440 |
51 | Seat P60-34-007 Suction Valve Spring TPC600 | 00-000000111614 |
52 | Filter mesh HTNB007.02.00 (discharge manifold filter) | 00-000000147092 |
53 | Toothed hub WSH1401120 coupling 314H W15-CG-321 (pump drive F500) | 00-000000112445 |
54 | Valve Puller 3 1/2″, 4″ & 4 1/2″ P60-34-966 Hydraulic Pump TPC600 | 00-000000112531 |
55 | Plunger Puller 1 1/2″ P60-34-930 Square TPC600 | 00-000000112537 |
56 | Valve Seat Puller F1300 | 00-000000112539 |
57 | Valve Seat Puller F1300 | 00-000000112539 |
58 | Seal 3 1/2″ P60-34-818 Half Rod TPC600 | 00-000000113604 |
59 | Seal 9.125×10.375×0.625 transmission shaft NB100.03.11 3NB-1600HL | AD-000000154578 |
60 | D-shaped seal 7000014374 valve cover TPC600 | 00-000000113595 |
61 | D-shaped seal 7000014375 front cover TPC600 | 00-000000113596 |
62 | F500 Bushing Seal | 00-000000009867 |
63 | Bushing seal GH3101-05.04 F1000 | 00-000000009865 |
64 | Valve Cover Seal RS11309.05.011 F1300 | 00-000000009933 |
65 | Cylinder Cover Seal RS11309.05.008 F1300 | 00-000000009938 |
66 | Cylinder Cover Seal RS11309.05.008 F1300 | 00-000000009938 |
67 | Oil seal GH3101-04.18 4.5″x5.5″x0.5″ half-rod double-sided F1000 | 00-000000009942 |
68 | Flange 3 1/8″ ZX33003.01 valve JA-3H | 00-000000147280 |
69 | Flange P60-14-015 pump gearbox TPC600 | AD-000000153844 |
70 | Valve Cover Flange NB018.01.06 / 1200520189 1600F | 00-000000147167 |
71 | Clamp RS11309.05.021 for connecting rod-half rod F1300 | 00-000000011156 |
72 | Clamp RS11309.05.021 for connecting rod-half rod F1300 | 00-000000011156 |
73 | Clamp RS11309.05.021 for connecting rod-half rod F1300 | 00-000000011156 |
74 | Rod mounting clamp RS11311.05.16.01 F500 | 00-000000011157 |
75 | Pin B.05.024 1 1/2-12UNF-8UNX 1/4 F500 | 00-000000012238 |
76 | Pin P60-34-015 tightening half-rod TPC600 | AD-000000154735 |
77 | Manifold stud B.05.025 1 1/8 -12UNF-8UNx9 F500 | 00-000000012248 |
78 | Shear pin of safety valve JA-3 | 00-000000115891 |
79 | Shear pin of safety valve JA-3 | 00-000000115891 |
80 | Rod GH3161-05.18(G) with nut F1300 | 00-000000012467 |
81 | JA-3 valve piston rod | 00-000000115935 |
82 | Fitting GH3101-28.01 valve JA-3 | 00-000000116010 |
83 | Fitting GH3101-28.01 valve JA-3 | 00-000000116010 |
Contact:Mr Liu
Mobile:15869109368
Tel:86-571-89967020
E-mail:info@dawopu.com
Address:No151 ,ZiDingXiang Rd, Hangzhou. Zhejiang Province, China